Difference between revisions of "BMO"
Jump to navigation
Jump to search
Line 37: | Line 37: | ||
* is there a matching laser acrylic colour? | * is there a matching laser acrylic colour? | ||
** http://www.plasticstockist.com/Duo-Engraving-Perspex/Silver-Duo-Perspex-Engraving-Acrylic-Sheet.aspx | ** http://www.plasticstockist.com/Duo-Engraving-Perspex/Silver-Duo-Perspex-Engraving-Acrylic-Sheet.aspx | ||
+ | |||
+ | == Raspberry Pi == | ||
+ | * Rather annoyingly I burnt out a Pi when connecting the wrong power supply - I connected the monitor's 12v supply instead of the hub's 5v supply. Same connectors! NEVER DO THIS AGAIN! | ||
+ | * Now using my "Vanity Pi" (the one in the neon green PiBow case) | ||
+ | |||
+ | == Powered USB Hub == | ||
+ | * to support the current pulled by the various USB peripherals, especially the WiFi | ||
+ | |||
+ | == USB WiFi adapter == | ||
+ | * EDUP model from DealExtreme | ||
+ | * Tiny! | ||
+ | * works well right now but only one SSID is currently set up - OK at HackSpace as there are plenty of wired LAN points | ||
+ | |||
+ | == Speaker holes == | ||
+ | |||
+ | 7x pillar drill 6mm - backed with black cloth | ||
== Arms and Legs == | == Arms and Legs == | ||
+ | |||
+ | * Electrical solid 3-core cable | ||
+ | * poseable | ||
+ | * doubled up for legs (but not feet) | ||
+ | * 3 cores become fingers of hand | ||
+ | * tee shirt material socks | ||
+ | |||
+ | == Floppy/Cart slot == | ||
+ | |||
+ | * Dimensions not fully decided | ||
+ | * GameBoy cart slot size? | ||
+ | * make functional? | ||
+ | |||
+ | == VHS tape slot == | ||
+ | |||
+ | * sprung flap | ||
+ | * access to back panel opening mech | ||
+ | * [[http://adventuretime.wikia.com/wiki/Holly_Jolly_Secrets_Part_I?file=Bmobutt.PNG "it goes in my butt"]] | ||
+ | |||
+ | == Front USB ports == | ||
+ | * keyboard | ||
+ | * mouse | ||
+ | * game controllers | ||
+ | * forwarded to internal USB hub |
Revision as of 09:06, 16 May 2013
A little buddy who wants to play video games.
See http://adventuretime.wikia.com/wiki/BMO
This is another "Near Zero Cost" project so I'm just using what comes to hand or what I already have lying around.
Work In Progress Gallery
<<TODO pull in twitpic images, ow.ly images etc.>>
Scale and geometry
The geometry is very important! This has to be a "Real-Life" character.
Scale to fit small CCTV PAL monitor for face
Do many prototypes: -
- BMO dimensions in paper
- BMO body in card
- BMO body in construction plastic
- BMO laser cut acrylic?
Revisions to date
BMO Mark One: a simple foam space model to get screen location and general geometry decided.
BMO Mark Two: a heat-formed plastic body with permanent screen mounting.
Accuracy
What colour is BMO?
- google images search for BMO: http://www.google.co.uk/search?safe=active&q=bmo&tbm=isch
- essentially teal == #008080
- GIMP eyedropper tool sample colours
- is there a matching laser acrylic colour?
Raspberry Pi
- Rather annoyingly I burnt out a Pi when connecting the wrong power supply - I connected the monitor's 12v supply instead of the hub's 5v supply. Same connectors! NEVER DO THIS AGAIN!
- Now using my "Vanity Pi" (the one in the neon green PiBow case)
Powered USB Hub
- to support the current pulled by the various USB peripherals, especially the WiFi
USB WiFi adapter
- EDUP model from DealExtreme
- Tiny!
- works well right now but only one SSID is currently set up - OK at HackSpace as there are plenty of wired LAN points
Speaker holes
7x pillar drill 6mm - backed with black cloth
Arms and Legs
- Electrical solid 3-core cable
- poseable
- doubled up for legs (but not feet)
- 3 cores become fingers of hand
- tee shirt material socks
Floppy/Cart slot
- Dimensions not fully decided
- GameBoy cart slot size?
- make functional?
VHS tape slot
- sprung flap
- access to back panel opening mech
- ["it goes in my butt"]
Front USB ports
- keyboard
- mouse
- game controllers
- forwarded to internal USB hub