Difference between revisions of "TIG welder"
m |
|||
| Line 6: | Line 6: | ||
== TIG welder shield gas == | == TIG welder shield gas == | ||
| + | Pure Argon | ||
== TIG welder capacity and rating == | == TIG welder capacity and rating == | ||
| Line 13: | Line 14: | ||
RFID control of access will be installed shortly. | RFID control of access will be installed shortly. | ||
| + | |||
| + | == TIG tips and collets== | ||
| + | |||
| + | ==TIG filler rods== | ||
| + | |||
| + | == TIG Welding tip pages== | ||
| + | Random collection of useful links | ||
| + | * http://www.mig-welding.co.uk/tig-technique.htm | ||
| + | * http://www.millerwelds.com/resources/improving-your-skills/tig/ | ||
| + | * http://www.mig-welding.co.uk/tig-calculator.htm | ||
| + | * | ||
Revision as of 16:14, 8 June 2014
Currently (May 2014) being comissioned.
TIG (Tungsten Inert Gas) welding is particularly useful for aluminium, It uses an electrode nozzle with a fixed (should be permanent, but they do wear) tungsten tip where a plasma 'flame' is created (started with a high-voltage / high freequency starter) and used to heat the filler wire and joint. The nozzle allows a flow of inert shield gas around the working area, reducing slag creation and (particularly important with aluminium) oxidation.
The TIG welder is a 'stick' welder - the electrode / nozzle is held in one hand, and the filler wire applied with the other.
TIG welder shield gas
Pure Argon
TIG welder capacity and rating
TIG welder power supply
A 63A plug and socket connection is used, with a pushbutton on/off control station and no-volt release.
RFID control of access will be installed shortly.
TIG tips and collets
TIG filler rods
TIG Welding tip pages
Random collection of useful links