File:Ultimaker 0xc888.jpg

Original file ‎(480 × 640 pixels, file size: 147 KB, MIME type: image/jpeg)

Ultimaker 3D Printer

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	23:32, 10 February 2014		480 × 640 (147 KB)	Robert (talk \| contribs)	Ultimaker 3D Printer

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Panasonic
Camera model	DMC-TZ10
Author	Picasa
Exposure time	1/30 sec (0.033333333333333)
F Number	f/3.3
ISO speed rating	160
Date and time of data generation	21:17, 3 June 2013
Lens focal length	4.1 mm
Horizontal resolution	180 dpi
Vertical resolution	180 dpi
Software used	Ver.1.0
File change date and time	23:31, 10 February 2014
Y and C positioning	Co-sited
Exposure Program	Normal program
Exif version	2.21
Date and time of digitizing	21:17, 3 June 2013
Meaning of each component	Y Cb Cr does not exist
Image compression mode	4
APEX exposure bias	0
Maximum land aperture	3.44 APEX (f/3.29)
Metering mode	Pattern
Light source	Flash
Flash	Flash fired, auto mode
Supported Flashpix version	1
Color space	sRGB
Sensing method	One-chip color area sensor
File source	Digital still camera
Scene type	A directly photographed image
Custom image processing	Normal process
Exposure mode	Auto exposure
White balance	Auto white balance
Focal length in 35 mm film	25 mm
Scene capture type	Standard
Scene control	Low gain up
Contrast	Normal
Saturation	Normal
Sharpness	Normal
Unique image ID	5acf95c66148856bc8eed72f31a6c2e9
IIM version	4