Kinect

Kinect

Manufacturer	Microsoft
Model	Xbox360 Kinect
AKA	{{{aka}}}
Obtained	Purchased through Pledge Drive
Location	Comfy Area
Team	Tools
Induction Required	No
Booking	{{{booking}}}
Status	Defunct
Tools: all pages • list • Power Tools • Broken tools {{}}

Xbox 360 Kinect

This camera at first glance may be dismissed as just a gaming device. Its definitely not! It has a variety of uses when plugged into a PC or Laptop and is actually quite easy to use.

Installing the Camera on Windows

For the specific camera that the hackspace owns, you must download and install Kinect for Windows SDK v1.7

It can be found on the microsoft website here: http://www.microsoft.com/en-gb/download/details.aspx?id=36996

3D Scanning

Once you have installed all the drivers the camera can be used to produce 3D Printable STL files of anything you can get a good scan of. Phill and I were able to get very good scans of our heads by sitting on office chairs in the studio area and slowly spinning on the spot.

The software used to produce the scans is called Skanect. There are lots of videos on youtube showing how to use it but it is generally pretty self explanatory. When exporting the STL files for 3D printing you will notice that there is a 5000 face limit on the Free version of skanect. The files are still perfectly useable so don't worry about it too much unless you are targeting perfect scans and have access to a Resin/ DLP 3D printer.

Get the software here: https://skanect.occipital.com/download/