Difference between revisions of "Bartop Arcade Machine"
Jump to navigation
Jump to search
m |
m |
||
| Line 1: | Line 1: | ||
Mini Defender machine based on Raspberry Pi with separate control panel. | Mini Defender machine based on Raspberry Pi with separate control panel. | ||
| − | |||
| − | |||
| − | |||
* Raspberry Pi | * Raspberry Pi | ||
| + | ** PiPlay AdvanceMAME install | ||
** currently a Raspberry Pi Model B+ I got from Phenoptix (for £26.99 using a 10% discount code for EMFCAMP 2014) | ** currently a Raspberry Pi Model B+ I got from Phenoptix (for £26.99 using a 10% discount code for EMFCAMP 2014) | ||
** shall probably upgrade to Raspberry Pi 2 Model B if performance is a problem | ** shall probably upgrade to Raspberry Pi 2 Model B if performance is a problem | ||
| + | * Dell LCD monitor with broken controls | ||
* HDMI-VGA adapter & gender changer | * HDMI-VGA adapter & gender changer | ||
| − | * 19mm plywood sides | + | * HP PC speakers from scrap |
| − | ** annoyingly the plywood is not even flat! both sides bend off square to one side! | + | ** Audio TDA7053AT 2x1W Audio Power Amplifier SO16W http://www.nxp.com/documents/data_sheet/TDA7053A.pdf |
| − | * T-Molding | + | * cabinet |
| + | ** 19mm plywood sides | ||
| + | *** annoyingly the plywood is not even flat! both sides bend off square to one side! | ||
| + | ** Chipboard base | ||
| + | ** Knock-Down joints for assembly -- http://www.screwfix.com/p/white-kd-joints-pack-of-10/87601 | ||
| + | ** T-Molding | ||
** slot cutter - from China for huge discount - 1/4" shaft required use of big router table which isn't flat! | ** slot cutter - from China for huge discount - 1/4" shaft required use of big router table which isn't flat! | ||
| − | * living hinge plywood bends with veneer surface | + | ** living hinge plywood bends with laser polypropylene sheet veneer surface |
| − | * backlit marquee panel | + | ** adhesive to use for polypropylene to plywood? |
| − | + | ** backlit marquee panel | |
* Control panel: Defender layout | * Control panel: Defender layout | ||
** original dimensions metricated! | ** original dimensions metricated! | ||
Revision as of 13:42, 10 March 2015
Mini Defender machine based on Raspberry Pi with separate control panel.
- Raspberry Pi
- PiPlay AdvanceMAME install
- currently a Raspberry Pi Model B+ I got from Phenoptix (for £26.99 using a 10% discount code for EMFCAMP 2014)
- shall probably upgrade to Raspberry Pi 2 Model B if performance is a problem
- Dell LCD monitor with broken controls
- HDMI-VGA adapter & gender changer
- HP PC speakers from scrap
- Audio TDA7053AT 2x1W Audio Power Amplifier SO16W http://www.nxp.com/documents/data_sheet/TDA7053A.pdf
- cabinet
- 19mm plywood sides
- annoyingly the plywood is not even flat! both sides bend off square to one side!
- Chipboard base
- Knock-Down joints for assembly -- http://www.screwfix.com/p/white-kd-joints-pack-of-10/87601
- T-Molding
- slot cutter - from China for huge discount - 1/4" shaft required use of big router table which isn't flat!
- living hinge plywood bends with laser polypropylene sheet veneer surface
- adhesive to use for polypropylene to plywood?
- backlit marquee panel
- 19mm plywood sides
- Control panel: Defender layout
- original dimensions metricated!
- laminated laser cut ply and MDF
- gold leaf switch buttons
- Sanwa bat joystick with modified plate