Difference between revisions of "Bartop Arcade Machine"
Jump to navigation
Jump to search
m |
m |
||
| Line 5: | Line 5: | ||
** Audio TDA7053AT 2x1W Audio Power Amplifier SO16W http://www.nxp.com/documents/data_sheet/TDA7053A.pdf | ** Audio TDA7053AT 2x1W Audio Power Amplifier SO16W http://www.nxp.com/documents/data_sheet/TDA7053A.pdf | ||
* Raspberry Pi | * Raspberry Pi | ||
| + | ** currently a Raspberry Pi Model B+ I got from Phenoptix (for £26.99 using a 10% discount code for EMFCAMP 2014) | ||
| + | ** shall probably upgrade if performance is a problem | ||
* HDMI-VGA adapter & gender changer | * HDMI-VGA adapter & gender changer | ||
* 19mm plywood sides | * 19mm plywood sides | ||
| + | ** annoyingly the plywood is not even flat! both sides bend off square to one side! | ||
* T-Molding | * T-Molding | ||
| − | ** slot cutter | + | ** slot cutter - from China for huge discount - 1/4" shaft required use of big router table which isn't flat! |
* living hinge plywood bends with veneer surface | * living hinge plywood bends with veneer surface | ||
* backlit marquee panel | * backlit marquee panel | ||
Revision as of 12:03, 10 March 2015
Mini Defender machine based on Raspberry Pi with separate control panel.
- Dell LCD monitor with broken controls
- HP PC speakers from scrap
- Audio TDA7053AT 2x1W Audio Power Amplifier SO16W http://www.nxp.com/documents/data_sheet/TDA7053A.pdf
- Raspberry Pi
- currently a Raspberry Pi Model B+ I got from Phenoptix (for £26.99 using a 10% discount code for EMFCAMP 2014)
- shall probably upgrade if performance is a problem
- HDMI-VGA adapter & gender changer
- 19mm plywood sides
- annoyingly the plywood is not even flat! both sides bend off square to one side!
- T-Molding
- slot cutter - from China for huge discount - 1/4" shaft required use of big router table which isn't flat!
- living hinge plywood bends with veneer surface
- backlit marquee panel
- PiPlay AdvanceMAME install
- Control panel: Defender layout
- original dimensions metricated!
- laminated laser cut ply and MDF
- gold leaf switch buttons
- Sanwa bat joystick with modified plate