Difference between revisions of "Bartop Arcade Machine"
Jump to navigation
Jump to search
m |
m |
||
| Line 1: | Line 1: | ||
Mini Defender machine based on Raspberry Pi with separate control panel. | Mini Defender machine based on Raspberry Pi with separate control panel. | ||
| + | |||
| + | <TODO photo gallery> | ||
| + | |||
| + | <TODO summary and jump menu> | ||
| + | |||
* Raspberry Pi | * Raspberry Pi | ||
** PiPlay AdvanceMAME install | ** PiPlay AdvanceMAME install | ||
| − | ** | + | ** initially using a Raspberry Pi Model B+ I got from Phenoptix (for £26.99 using a 10% discount code for EMFCAMP 2014) |
| − | ** | + | ** upgraded to a Raspberry Pi 2 Model B to improve performance (£33.94 from CPC with 8Gb NOOBS SD card) |
| − | * Dell LCD monitor with broken controls | + | * Dell e172fpb LCD 17-in monitor with broken controls |
| + | ** thanks to Rob Miles for the donation | ||
| + | ** fault: main menu flashes up - removed panel controls for now, which solves it until I need to make adjustments | ||
| + | ** BENQ internals | ||
| + | ** removed plastic housing and built a thin laser-cut boxing to hold it in place | ||
| + | ** 360 x 296 However, there are tabs and screws on the sides that stick out slightly | ||
| + | ** had a go at fixing the panel controls - buzzed out all the connections and one of the pushbuttons is slightly dodgy but nothing major | ||
| + | *** refitted panel buttons and they all seem to bring up a padlock icon! | ||
| + | *** OSD locked seems to be a common issue with these monitors http://en.community.dell.com/support-forums/peripherals/f/3529/t/19281532 | ||
| + | *** other crazyness! http://www.paulstravelpictures.com/Dell-LCD-Monitor-Flashing-Padlock-Icon/index.htm | ||
* HDMI-VGA adapter & gender changer | * HDMI-VGA adapter & gender changer | ||
| − | * HP PC speakers from scrap | + | ** from DealExtreme - they have many versions at different prices |
| + | ** worked fine with the Pi Model B+ but when I tried to use it on the Pi 2 B it would not work. I spent a few evenings going through many Pi config settings and eventually I came out with a magic combination that worked - I'd better write that down! | ||
| + | * 2x HP PC speakers from scrap - 16ohm, nice shape | ||
** Audio TDA7053AT 2x1W Audio Power Amplifier SO16W http://www.nxp.com/documents/data_sheet/TDA7053A.pdf | ** Audio TDA7053AT 2x1W Audio Power Amplifier SO16W http://www.nxp.com/documents/data_sheet/TDA7053A.pdf | ||
** Alternate amp: PAM8403 - 99p with 50k pot | ** Alternate amp: PAM8403 - 99p with 50k pot | ||
| Line 25: | Line 41: | ||
** laminated laser cut ply and MDF | ** laminated laser cut ply and MDF | ||
** gold leaf switch buttons | ** gold leaf switch buttons | ||
| − | ** Sanwa bat joystick with modified plate | + | ** Sanwa bat joystick |
| + | *** with modified mounting plate: a diagonal cut-away that is essential to get the reverse button close enough to the joystick | ||
| + | *** plate 95mm x 78mm | ||
| + | *** square plastic housing is 65mm square. Use 66mm to be safe | ||
Revision as of 15:16, 16 May 2015
Mini Defender machine based on Raspberry Pi with separate control panel.
<TODO photo gallery>
<TODO summary and jump menu>
- Raspberry Pi
- PiPlay AdvanceMAME install
- initially using a Raspberry Pi Model B+ I got from Phenoptix (for £26.99 using a 10% discount code for EMFCAMP 2014)
- upgraded to a Raspberry Pi 2 Model B to improve performance (£33.94 from CPC with 8Gb NOOBS SD card)
- Dell e172fpb LCD 17-in monitor with broken controls
- thanks to Rob Miles for the donation
- fault: main menu flashes up - removed panel controls for now, which solves it until I need to make adjustments
- BENQ internals
- removed plastic housing and built a thin laser-cut boxing to hold it in place
- 360 x 296 However, there are tabs and screws on the sides that stick out slightly
- had a go at fixing the panel controls - buzzed out all the connections and one of the pushbuttons is slightly dodgy but nothing major
- refitted panel buttons and they all seem to bring up a padlock icon!
- OSD locked seems to be a common issue with these monitors http://en.community.dell.com/support-forums/peripherals/f/3529/t/19281532
- other crazyness! http://www.paulstravelpictures.com/Dell-LCD-Monitor-Flashing-Padlock-Icon/index.htm
- HDMI-VGA adapter & gender changer
- from DealExtreme - they have many versions at different prices
- worked fine with the Pi Model B+ but when I tried to use it on the Pi 2 B it would not work. I spent a few evenings going through many Pi config settings and eventually I came out with a magic combination that worked - I'd better write that down!
- 2x HP PC speakers from scrap - 16ohm, nice shape
- Audio TDA7053AT 2x1W Audio Power Amplifier SO16W http://www.nxp.com/documents/data_sheet/TDA7053A.pdf
- Alternate amp: PAM8403 - 99p with 50k pot
- cabinet
- 19mm plywood sides
- annoyingly the plywood is not even flat! both sides bend off square to one side!
- Chipboard base
- Knock-Down joints for assembly -- http://www.screwfix.com/p/white-kd-joints-pack-of-10/87601
- T-Molding
- slot cutter - from China for huge discount - 1/4" shaft required use of big router table which isn't flat!
- living hinge plywood bends with laser polypropylene sheet veneer surface
- adhesive to use for polypropylene to plywood?
- 3M Scotch-Weld Hi-Strength 90 Spray Adhesive
- backlit marquee panel
- 19mm plywood sides
- Control panel: Defender layout
- original dimensions metricated!
- laminated laser cut ply and MDF
- gold leaf switch buttons
- Sanwa bat joystick
- with modified mounting plate: a diagonal cut-away that is essential to get the reverse button close enough to the joystick
- plate 95mm x 78mm
- square plastic housing is 65mm square. Use 66mm to be safe