Bartop Arcade Machine
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Mini Defender machine based on Raspberry Pi with separate control panel.
- Raspberry Pi
- PiPlay AdvanceMAME install
- currently a Raspberry Pi Model B+ I got from Phenoptix (for £26.99 using a 10% discount code for EMFCAMP 2014)
- shall probably upgrade to Raspberry Pi 2 Model B if performance is a problem
- Dell LCD monitor with broken controls
- HDMI-VGA adapter & gender changer
- HP PC speakers from scrap
- Audio TDA7053AT 2x1W Audio Power Amplifier SO16W http://www.nxp.com/documents/data_sheet/TDA7053A.pdf
- Alternate amp: PAM8403 - 99p with 50k pot
- cabinet
- 19mm plywood sides
- annoyingly the plywood is not even flat! both sides bend off square to one side!
- Chipboard base
- Knock-Down joints for assembly -- http://www.screwfix.com/p/white-kd-joints-pack-of-10/87601
- T-Molding
- slot cutter - from China for huge discount - 1/4" shaft required use of big router table which isn't flat!
- living hinge plywood bends with laser polypropylene sheet veneer surface
- adhesive to use for polypropylene to plywood?
- 3M Scotch-Weld Hi-Strength 90 Spray Adhesive
- backlit marquee panel
- 19mm plywood sides
- Control panel: Defender layout
- original dimensions metricated!
- laminated laser cut ply and MDF
- gold leaf switch buttons
- Sanwa bat joystick with modified plate