Difference between revisions of "Blast Gates - central dust extractor"

From Nottinghack Wiki
Jump to navigation Jump to search
(more information from bob)
 
Line 1: Line 1:
 +
{{Tool
 +
|image=File:Gated Dust Extractor.jpg
 +
|team=Woodworking
 +
|location=Dusty Area
 +
}}
 +
 
'''Blast Gates''' are part of the [[Dusty Area]]'s extraction system.
 
'''Blast Gates''' are part of the [[Dusty Area]]'s extraction system.
  
[[Category:Tools and Equipment in Dusty Area]]
 
[[Category:Woodwork]]
 
 
== Overview ==
 
== Overview ==
 +
 
The Large dust collector attached to the Table Saw has now been customised with three "Blast Gates". This allows the suction to be switched between three stations.
 
The Large dust collector attached to the Table Saw has now been customised with three "Blast Gates". This allows the suction to be switched between three stations.
Currently, that includes the table saw, a flexible connection for Router or the planer thicknesser, in addition to  "Sweep" a sort of dustpan with vacuum attachment.
+
 
==Use==
+
Each port has been fitted with a blast gate. Extraction is on when the slider is up.
 +
 
 +
The saw is connected to the middle blast gate and this one should be left on (up) and the other two off (down) when in normal use.
 +
 
 +
The gate on the right is connected to a floor scoop. Floor sweepings can be pushed into this scoop. Please remove large pieces of wood from the sweepings as they may block the pipe.
 +
 
 +
The gate on the left is connected to a length of 100mm hose. This will plug into the chip collector box on the planer/thicknesser. (Required induction)
 +
 
 +
Air flow to the extractor is best when only one blast gate is open. If you make use of this please return the gates to centre up, other two down on completion of the job. If you notice that the extractor filter bag is not fully erect then check the blast gates; then the hoses for blockages.
 +
 
 +
== Use ==
 +
 
 
The suction can be directed to each of the individual stations by opening and closing each of the gates appropriate to the station in use.
 
The suction can be directed to each of the individual stations by opening and closing each of the gates appropriate to the station in use.
 +
 +
== Links ==
 +
 +
* [https://groups.google.com/forum/#!topic/nottinghack/14Db3E5o3Bk Google Groups message on blast gates]
 +
 +
[[Category:Tools and Equipment in Dusty Area]]
 +
[[Category:Woodwork]]

Latest revision as of 19:37, 11 September 2019

Blast Gates - central dust extractor
Gated Dust Extractor.jpg
Manufacturer {{{manufacturer}}}
Model {{{model}}}
Obtained {{{obtained}}}
Location Dusty Area
Team Woodworking
Induction Required {{{induction}}}
Booking {{{booking}}}
Status Defunct
Tools:   all pageslistPower ToolsBroken tools     {{}}


Blast Gates are part of the Dusty Area's extraction system.

Overview

The Large dust collector attached to the Table Saw has now been customised with three "Blast Gates". This allows the suction to be switched between three stations.

Each port has been fitted with a blast gate. Extraction is on when the slider is up.

The saw is connected to the middle blast gate and this one should be left on (up) and the other two off (down) when in normal use.

The gate on the right is connected to a floor scoop. Floor sweepings can be pushed into this scoop. Please remove large pieces of wood from the sweepings as they may block the pipe.

The gate on the left is connected to a length of 100mm hose. This will plug into the chip collector box on the planer/thicknesser. (Required induction)

Air flow to the extractor is best when only one blast gate is open. If you make use of this please return the gates to centre up, other two down on completion of the job. If you notice that the extractor filter bag is not fully erect then check the blast gates; then the hoses for blockages.

Use

The suction can be directed to each of the individual stations by opening and closing each of the gates appropriate to the station in use.

Links