Difference between revisions of "CNC UK Heightmap"

From Nottinghack Wiki
Jump to navigation Jump to search
Line 17: Line 17:
 
Toolpaths were programmed from the STL file in [[Fusion 360]]. The toolpaths used were: Adaptive Clearing & Parallel.  
 
Toolpaths were programmed from the STL file in [[Fusion 360]]. The toolpaths used were: Adaptive Clearing & Parallel.  
 
[[File:UK Heightmap (10).jpg|300px|thumb|left|Fusion 360 was used to produce the toolpaths]]
 
[[File:UK Heightmap (10).jpg|300px|thumb|left|Fusion 360 was used to produce the toolpaths]]
−
 
+
{{clear}}
  
 
==Gallery==
 
==Gallery==

Revision as of 04:36, 26 December 2019

CNC UK Heightmap
UK Heightmap (8).jpg
Primary Contact Dan Spencer
Created 18/12/2019
Completed 20/12/2019
Dormant
Version
Members
Manufacturer {{{manufacturer}}}
Model {{{model}}}
Location [[{{{location}}}]]
GitHub / Repo {{{repo}}}
Status Complete
Type Members Project
Live Status
QR code

I found a website called Terrain2STL and used it to produce this topographic map of the UK.

Toolpaths were programmed from the STL file in Fusion 360. The toolpaths used were: Adaptive Clearing & Parallel.

Fusion 360 was used to produce the toolpaths

Gallery

  • Rough Cut (Adaptive Clearing)

  • Rough Cut (Adaptive Clearing)

  • Finishing Cut (Parallel)

  • Finishing Cut (Parallel)

  • Trimming on the Bandsaw

  • Sanding and manual correction

  • Completed bare wood

  • Painted map

  • Painted map

Retrieved from "https://wiki.nottinghack.org.uk/index.php?title=CNC_UK_Heightmap&oldid=24006"