Difference between revisions of "CNC UK Heightmap"

Latest revision as of 17:03, 13 January 2020

I found a website called Terrain2STL and used it to produce this topographic map of the UK.

Toolpaths were programmed from the STL file in Fusion 360. The toolpaths used were: Adaptive Clearing & Parallel.

Fusion 360 was used to produce the toolpaths

@@ Line 13: / Line 13: @@
 |qrmode=1
 }}
+I found a website called [http://jthatch.com/Terrain2STL/ Terrain2STL] and used it to produce this topographic map of the UK.
+Toolpaths were programmed from the STL file in [[Fusion 360]]. The toolpaths used were: Adaptive Clearing & Parallel.
+[[File:UK Heightmap (10).jpg|300px|thumb|left|Fusion 360 was used to produce the toolpaths]]
+{{clear}}
 ==Gallery==
 <gallery mode=packed-hover heights=300px>
-File:UK Heightmap (1).jpg
+File:UK Heightmap (1).jpg|Rough Cut (Adaptive Clearing)
-File:UK Heightmap (2).jpg
+File:UK Heightmap (2).jpg|Rough Cut (Adaptive Clearing)
-File:UK Heightmap (3).jpg
+File:UK Heightmap (3).jpg|Finishing Cut (Parallel)
-File:UK Heightmap (4).jpg
+File:UK Heightmap (4).jpg|Finishing Cut (Parallel)
-File:UK Heightmap (5).jpg
+File:UK Heightmap (5).jpg|Trimming on the Bandsaw
-File:UK Heightmap (6).jpg
+File:UK Heightmap (6).jpg|Sanding and manual correction
-File:UK Heightmap (7).jpg
+File:UK Heightmap (7).jpg|Completed bare wood
-File:UK Heightmap (8).jpg
+File:UK Heightmap (8).jpg|Painted map
-File:UK Heightmap (9).jpg
+File:UK Heightmap (9).jpg|Painted map
 </gallery>
+[[Category:CNC Projects]]
+[[Category:Maps and plans]]