Difference between revisions of "CNC UK Heightmap"

Revision as of 04:36, 26 December 2019

I found a website called Terrain2STL and used it to produce this topographic map of the UK.

Toolpaths were programmed from the STL file in Fusion 360. The toolpaths used were: Adaptive Clearing & Parallel.

Fusion 360 was used to produce the toolpaths

@@ Line 13: / Line 13: @@
 |qrmode=1
 }}
+I found a website called [http://jthatch.com/Terrain2STL/ Terrain2STL] and used it to produce this topographic map of the UK.
+Toolpaths were programmed from the STL file in [[Fusion 360]]. The toolpaths used were: Adaptive Clearing & Parallel.
+[[File:UK Heightmap (10).jpg|300px|thumb|left|Fusion 360 was used to produce the toolpaths]]
 ==Gallery==