Difference between revisions of "Cleaning the hackspace"

From Nottinghack Wiki
Jump to navigation Jump to search
m (Correct hierarchy)
 
(57 intermediate revisions by 7 users not shown)
Line 1: Line 1:
We now employ a firm of cleaners to visit weekly (Thursday Mornings) to sweep / vacuum / mop / wipe the studio, Kitchen, Bathroom and Blue room and Comfy area.
+
{{also|Reoccurring tasks|Waste and Recycling Initiative}}
 +
{{overview}}
  
This cannot extend to dealing with 'piles of stuff' left around - they have been asked to work on the basis that it might be part of a project - hopefully accidents won't happen, but to prevent them...
+
Cleaning and maintaining the workspaces in the hackspace is the responsibility of the membership - that means ''you!'' Be the hero space deserves.
  
Nobody is employed to clean the rest of hackspace, so we share the work. If you see any small spills or dirty patches, please clean them up.  This page explains how you can get involved.
+
== Expectations ==
 +
There is no formal organised cleaning or cleaners for the workshops and creative areas. Although from time to time, contractors are employed for the Domestic spaces upstairs, this is limited to the kitchen and toilets. Please build time into your visit to clear up the area where you have been working and put away any equipment you have used.
  
== Realistic expectations ==
+
If you exhaust or use consumables please consider replacing what you have used or notify the relevant [[Teams|team]].
The hackspace is heavily used and sometimes people don't have time to immediately clean up mess, so we don't expect it to be clean at all times.  '''''TODO: clarify what our expectations are on cleanliness'''''.
 
  
"I hope that keeping things clean will increase respect for the space and encourage people to treat it well" -- 21:02, 10 May 2012 (EST)
+
Clearing up and cleaning are important for the Safety of those using the space. Be sure benches and machines are thoroughly cleaned down after use. If the bins and tool waste receptacles are full, these will need clearing as well, this is your job.‎ Bins are explained below.
  
== How to take out the rubbish ==
+
Larger items of waste, abandoned projects and left over large materials present an undue physical and administrative burden on volunteers. They are also expensive for the space to remove as commercial waste, members should remove abandoned personal projects an Items themselves to avoid undue expense for the space. '''It's much more beneficial to the space if you take your rubbish home with you.'''
  
*NOTE* The dumpsters are not located out the "front" of the building, which is the ground floor entrance on Roden Street on the North side of the building (left out of the lift on the ground floor). It's not clear is this is permanent change or just while construction work goes on in the basement area.
+
If you notice someone lumping together bin bags and off-cuts for a trip to the bins, feel free to offer help as managing the doors and spilly piles of rubbish can be cumbersome. It is also an opportunity to engage with fellow hack-spacers - make a bin-friend!
  
Before throwing stuff away, please be aware of our [[Waste and Recycling Initiative]]. The rubbish bins are in the basement.  To reach them, go through the back doors of the hackspace and follow the corridor along and around to the right, where you will reach this goods lift:
+
== Laser off-cuts ==
[[Image:The-lift-in-hackspace-2.0.jpg|thumb|none|500px|This is the lift.  It's the most convenient way to get down to the rubbish bins.]]
+
Please take responsibility of any off cuts you generate. Save on chores by putting it in the outside red bins as you leave. Trim any useful waste up on the bandsaw so it can be easily stored as waste or donated for use.
  
If the lift is out of action (it often seems to be) there is an external fire-escape staircase down to the basement:
+
== Wood off-cuts ==
 +
The space generates a huge amount of off-cuts, normally these go to the general waste, so feel free to use them creatively in your own projects.
 +
 
 +
Some members have raided the wood off-cuts bin for burning at bonfire parties and the like, but be aware that burning paint and glue found on waste wood and timber composites can generate volatile toxic fumes, also fire, so lets be careful out there.
 +
 
 +
== Vacuuming ==
 +
 
 +
It's remarkable how much more welcoming a space can be after being vacuumed. This needs to be done regularly, as the dirt and dust gets bedded into the carpet, making it more difficult to restore.
 +
 
 +
=== Available vacuums ===
  
 
<gallery>
 
<gallery>
File:WBackExitDoor.JPG|go out of the back door of the Hackspace
+
File:Vacuum Titan.jpg|Titan (Blue Room)
File:WBackPassage1.JPG|continue straight along the corridor
 
File:WBackPassage2.JPG|through two sets of double-doors
 
File:WBackPassage2.JPG|until you get to the exit door on the right-hand side
 
File:WViewIntoBasement.JPG|to find the fire-escape staircase to the basement
 
 
</gallery>
 
</gallery>
  
(this way is not suitable during times of darkness)
+
The Titan that lives in the Blue Room has a wide tool that works with carpet or wooden floors.
 +
 
 +
The Vax 121 which is in the classroom currently has no tools, but half a dozen pipes. The tools from the nearby Titan do fit one of these pipes though.
 +
 
 +
=== Shop Vacuum cleaners don't suck ===
 +
 
 +
It's probably not faulty. Try this, in order:
  
Please do not dump rubbish anywhere is the shared / public parts of the building. BizSpace are very strict about this, and charge £50 per 'offence'. Remember you are on CCTV in the public parts of the building!
+
# '''Check the pipe is not blocked.''' Detach and have look down the exhaust end.
 +
# '''Change the bag'''. New ones are normally in the space under the window in the toilets. If there aren't any, let someone from the Snackspace team know.
 +
# '''Clean the filter.''' Once there's a new bag in place, make sure the filter is cleaned too. Refit the motor/lid, use the vacuum to clean the filter. Replace the filter.
  
The wheeled trollies in the Hackspace workshop are useful to shift large amounts of rubbish (when the lift is available).
+
== Dust bags from woodwork machinery exhausts ==
 +
Wear dust mask and gloves,
 +
Sawdust can be placed in the general waste but must be bagged, overfull bags may need partial transfer in order to be removed from the space, make sure all bags are sealed up as to not spill and contaminate the corridors as the the bags are removed from the space.
 +
Hint, bags with dust can be compressed by inserting a vacuum cleaner hose in the neck before tying up.
  
== Mopping the floors ==
+
== Taking out the rubbish ==
=== Tips for quick spot cleaning ===
+
 
 +
Like everything in the space, this is a job for a volunteer. There's no team responsible for this job, so please help out if you have a few moments.
 +
 
 +
=== Bin bags, cleaning materials, and gloves ===
 +
 
 +
Bin bags are normally under the sink in the kitchen. Other materials can be found in the vicinity of sinks in the workshop or inside the door of the workshop on the adjacent shelves.
 +
 
 +
=== How to take out the rubbish ===
 +
 
 +
Whilst doing this, you should assume there are sharps in the bins which are just waiting to snag you. '''Take care and wear suitable gloves throughout.'''
 +
 
 +
Remove the full bags from the bin. Replace the old bin liner ASAP, as this is easily forgotten. If there's some one else around, maybe ask them to do this part of the job.
 +
 
 +
The wheeled trolleys in the Hackspace workshop are useful to shift large amounts of rubbish, usually found near the [[Metalworking Area]]. The shopping trolly is particularly useful for this activity.
 +
 
 +
[[Image:The-new-lift-in-hackspace-2.0.jpg|thumb|right|250px|This is the lift. A convenient way to get heavy rubbish to the bins.]]
 +
 
 +
Before throwing stuff away, please be aware of our [[Waste and Recycling Initiative]]. 
 +
 
 +
=== Where are the bins? ===
 +
 
 +
'''Remember to take your RFID door access card and your phone, so you can get back in, or contact someone if there is a problem.'''
 +
 
 +
'''Access to the bins might be locked.''' Ask on Discord or e-mail trustees for the code for the bizspace bin door.
 +
 
 +
The rubbish bins are located at the back of the building on Liverpool Street and are accessed via the lift. They ''might'' be on Roden Street on bin days. Use the lift or stairs to the Roden Street entrance, then turn left out of the door and left again.
 +
 
 +
Go through the back doors of the Hackspace, past the [[Metalworking Area]]. Follow the corridor along and around to the right, where you will reach the lift. Exit on the ground floor to Roden Street, enlist a buddy to hold the doors and steer the trolly on the sloping pavement. Turn left and left again on Liverpool Street, the bins are accessed via the door at the side of the shutters.
 +
 
 +
<gallery widths=400px heights=400px>
 +
File:Bin Map.jpg
 +
File:Bin Location.jpeg
 +
</gallery>
 +
 
 +
The waste collections are every Tuesday and Thursday morning and is sorted by the contractors for recycling. The bins are frequently filled by other Bizspace tenants, so Tuesday evening is normally the best day to find the bins with capacity.
 +
 
 +
= Do not put rubbish in shared areas =
 +
 
 +
Do not dump rubbish anywhere in the shared / public parts of the building. BizSpace are very strict about this, and charge £50 per 'offence'. Remember you are on CCTV in the public parts of the building!
 +
 
 +
{{clear}}
 +
 
 +
= Mopping the floors =
 +
== Tips for quick spot cleaning ==
 
There is a small (blue) domestic mop and bucket for cleaning small patches.  This mop is usually stored in the kitchen.
 
There is a small (blue) domestic mop and bucket for cleaning small patches.  This mop is usually stored in the kitchen.
 
At the moment we don't have any "caution, wet floor" signs, but the large red mop bucket has a "caution" sign on the side, so it can be left out until the spot dries.
 
At the moment we don't have any "caution, wet floor" signs, but the large red mop bucket has a "caution" sign on the side, so it can be left out until the spot dries.
  
=== Tips for thorough mopping ===
+
== Tips for thorough mopping ==
 +
{{update|date=Feb 2019|section=yes|reason=A few TODO's regarding techniques here. Also some text about 2012 in here that probably isn't needed}}
 
# Choose a time when few people are around, so the floors have time to dry.
 
# Choose a time when few people are around, so the floors have time to dry.
 
# Fold the tables where possible and stack chairs before you begin (this pays off later).
 
# Fold the tables where possible and stack chairs before you begin (this pays off later).
Line 50: Line 111:
 
# '''Important:''' After you use the mop, squeeze out the water and leave the mop head loose so it can dry.  If the mop is left wet it will rot and get smelly.
 
# '''Important:''' After you use the mop, squeeze out the water and leave the mop head loose so it can dry.  If the mop is left wet it will rot and get smelly.
  
== Cleaning equipment ==
+
=== Available mops ===
 
We have a mop bucket with a Vileda wringer and an SYR InterChange mop handle ([http://uk.farnell.com/syr/920045/syr-interchange-mop-handle-blue/dp/1820589 920045]).  These 16oz replacement mop heads should fit our handle:
 
We have a mop bucket with a Vileda wringer and an SYR InterChange mop handle ([http://uk.farnell.com/syr/920045/syr-interchange-mop-handle-blue/dp/1820589 920045]).  These 16oz replacement mop heads should fit our handle:
  
Line 57: Line 118:
  
 
[[Image:Wheeled-mop-and-bucket.jpg|thumb|none|400px|Our mop and bucket.  Please look after it, because these are not cheap like domestic ones.]]
 
[[Image:Wheeled-mop-and-bucket.jpg|thumb|none|400px|Our mop and bucket.  Please look after it, because these are not cheap like domestic ones.]]
 +
 +
=See also=
 +
* [[Access to the space]]
  
 
[[Category:Featured]]
 
[[Category:Featured]]
 
[[Category:Infrastructure]]
 
[[Category:Infrastructure]]
[[Category:Pages_for_Update]]
+
[[Category:Clean and tidy]]

Latest revision as of 17:37, 20 April 2024

Overview
Nottinghack
Roden House - Feb 2019.jpg
The SpaceLocationNew Members
ToolsEventsTeamsProjects
VolunteeringInfrastructureNetwork
MembersAction ListDonations
Pledge DrivesMeetingFinancials
BrandingSuppliersHistory
20icon.png    25icon.png
Homepage    Rules    Members' Guide

Cleaning and maintaining the workspaces in the hackspace is the responsibility of the membership - that means you! Be the hero space deserves.

Expectations

There is no formal organised cleaning or cleaners for the workshops and creative areas. Although from time to time, contractors are employed for the Domestic spaces upstairs, this is limited to the kitchen and toilets. Please build time into your visit to clear up the area where you have been working and put away any equipment you have used.

If you exhaust or use consumables please consider replacing what you have used or notify the relevant team.

Clearing up and cleaning are important for the Safety of those using the space. Be sure benches and machines are thoroughly cleaned down after use. If the bins and tool waste receptacles are full, these will need clearing as well, this is your job.‎ Bins are explained below.

Larger items of waste, abandoned projects and left over large materials present an undue physical and administrative burden on volunteers. They are also expensive for the space to remove as commercial waste, members should remove abandoned personal projects an Items themselves to avoid undue expense for the space. It's much more beneficial to the space if you take your rubbish home with you.

If you notice someone lumping together bin bags and off-cuts for a trip to the bins, feel free to offer help as managing the doors and spilly piles of rubbish can be cumbersome. It is also an opportunity to engage with fellow hack-spacers - make a bin-friend!

Laser off-cuts

Please take responsibility of any off cuts you generate. Save on chores by putting it in the outside red bins as you leave. Trim any useful waste up on the bandsaw so it can be easily stored as waste or donated for use.

Wood off-cuts

The space generates a huge amount of off-cuts, normally these go to the general waste, so feel free to use them creatively in your own projects.

Some members have raided the wood off-cuts bin for burning at bonfire parties and the like, but be aware that burning paint and glue found on waste wood and timber composites can generate volatile toxic fumes, also fire, so lets be careful out there.

Vacuuming

It's remarkable how much more welcoming a space can be after being vacuumed. This needs to be done regularly, as the dirt and dust gets bedded into the carpet, making it more difficult to restore.

Available vacuums

The Titan that lives in the Blue Room has a wide tool that works with carpet or wooden floors.

The Vax 121 which is in the classroom currently has no tools, but half a dozen pipes. The tools from the nearby Titan do fit one of these pipes though.

Shop Vacuum cleaners don't suck

It's probably not faulty. Try this, in order:

  1. Check the pipe is not blocked. Detach and have look down the exhaust end.
  2. Change the bag. New ones are normally in the space under the window in the toilets. If there aren't any, let someone from the Snackspace team know.
  3. Clean the filter. Once there's a new bag in place, make sure the filter is cleaned too. Refit the motor/lid, use the vacuum to clean the filter. Replace the filter.

Dust bags from woodwork machinery exhausts

Wear dust mask and gloves, Sawdust can be placed in the general waste but must be bagged, overfull bags may need partial transfer in order to be removed from the space, make sure all bags are sealed up as to not spill and contaminate the corridors as the the bags are removed from the space. Hint, bags with dust can be compressed by inserting a vacuum cleaner hose in the neck before tying up.

Taking out the rubbish

Like everything in the space, this is a job for a volunteer. There's no team responsible for this job, so please help out if you have a few moments.

Bin bags, cleaning materials, and gloves

Bin bags are normally under the sink in the kitchen. Other materials can be found in the vicinity of sinks in the workshop or inside the door of the workshop on the adjacent shelves.

How to take out the rubbish

Whilst doing this, you should assume there are sharps in the bins which are just waiting to snag you. Take care and wear suitable gloves throughout.

Remove the full bags from the bin. Replace the old bin liner ASAP, as this is easily forgotten. If there's some one else around, maybe ask them to do this part of the job.

The wheeled trolleys in the Hackspace workshop are useful to shift large amounts of rubbish, usually found near the Metalworking Area. The shopping trolly is particularly useful for this activity.

This is the lift. A convenient way to get heavy rubbish to the bins.

Before throwing stuff away, please be aware of our Waste and Recycling Initiative.

Where are the bins?

Remember to take your RFID door access card and your phone, so you can get back in, or contact someone if there is a problem.

Access to the bins might be locked. Ask on Discord or e-mail trustees for the code for the bizspace bin door.

The rubbish bins are located at the back of the building on Liverpool Street and are accessed via the lift. They might be on Roden Street on bin days. Use the lift or stairs to the Roden Street entrance, then turn left out of the door and left again.

Go through the back doors of the Hackspace, past the Metalworking Area. Follow the corridor along and around to the right, where you will reach the lift. Exit on the ground floor to Roden Street, enlist a buddy to hold the doors and steer the trolly on the sloping pavement. Turn left and left again on Liverpool Street, the bins are accessed via the door at the side of the shutters.

The waste collections are every Tuesday and Thursday morning and is sorted by the contractors for recycling. The bins are frequently filled by other Bizspace tenants, so Tuesday evening is normally the best day to find the bins with capacity.

Do not put rubbish in shared areas

Do not dump rubbish anywhere in the shared / public parts of the building. BizSpace are very strict about this, and charge £50 per 'offence'. Remember you are on CCTV in the public parts of the building!

Mopping the floors

Tips for quick spot cleaning

There is a small (blue) domestic mop and bucket for cleaning small patches. This mop is usually stored in the kitchen. At the moment we don't have any "caution, wet floor" signs, but the large red mop bucket has a "caution" sign on the side, so it can be left out until the spot dries.

Tips for thorough mopping

  1. Choose a time when few people are around, so the floors have time to dry.
  2. Fold the tables where possible and stack chairs before you begin (this pays off later).
  3. (Probably we should put up a "caution, cleaning in progress" sign on the door, but we haven't bothered so far.)
  4. Use our water heater to boil the water (it is stored above the cupboards in the kitchen). Note: our kettle is small so you would have to wait for it to boil many times.
  5. We have a big red bucket with castors and a blue wringer (see cleaning equipment).
  6. We only have one floor cleaning product at the moment (the orange stuff under the kitchen sink) and we're nearly out (21:02, 10 May 2012 (EST)). It is recommended to avoid washing-up liquid, because this can make masses of bubbles and slippery residue that's hard to get off the floor again. TODO: look into appropriate floor cleaning products without bleach.
  7. This is a recommended mopping technique to clean a large area quickly, and take up most of the water again so it dries quickly:
    • TODO: describe technique.
  8. Important: Only empty the dirty water into the workshop sink, not the kitchen one (for hygiene).
  9. Important: After you use the mop, squeeze out the water and leave the mop head loose so it can dry. If the mop is left wet it will rot and get smelly.

Available mops

We have a mop bucket with a Vileda wringer and an SYR InterChange mop handle (920045). These 16oz replacement mop heads should fit our handle:

  • SYR No 16 PY Mop (991983)
  • SYR No 16 Twine Socket Mop (991986)
Our mop and bucket. Please look after it, because these are not cheap like domestic ones.

See also