Difference between revisions of "DIY Laser/Frame"
Jump to navigation
Jump to search
m (Fowkc moved page DIY Laser/Frame to Project:DIY Laser/Frame) |
(Marked for deletion - Project was stopped five years ago.) |
||
| Line 1: | Line 1: | ||
| + | {{delete}} | ||
Frame size is dependent on [[{{BASEPAGENAME}}/XY Gantry|XY Gantry]] size, which is dependent on the bed size. | Frame size is dependent on [[{{BASEPAGENAME}}/XY Gantry|XY Gantry]] size, which is dependent on the bed size. | ||
Revision as of 20:20, 5 February 2018
 |
This page has been tagged as requiring deletion. Please add a reason for the request (see see delete instructions.) Discuss request on the page's talk page. |
Frame size is dependent on XY Gantry size, which is dependent on the bed size.
Extrusion
The Buildlog laser uses Misumi extrusion (HFS5-2020 and HFS5-2040), which is the same extrusion that the MakerSlide is based on, so very compatible.
The Blackhole laser uses Bosch Rexroth extrusion with glued on v-rails.