Difference between revisions of "DIY Laser/Frame"
Jump to navigation
Jump to search
(Marked for deletion - Project was stopped five years ago.) |
|||
(One intermediate revision by the same user not shown) | |||
Line 1: | Line 1: | ||
− | {{ | + | {{Archive|date=January 2013}} |
+ | |||
Frame size is dependent on [[{{BASEPAGENAME}}/XY Gantry|XY Gantry]] size, which is dependent on the bed size. | Frame size is dependent on [[{{BASEPAGENAME}}/XY Gantry|XY Gantry]] size, which is dependent on the bed size. | ||
Latest revision as of 00:07, 20 February 2019
The information on this page is NOT current. It retained for historical or archival purposes only. (January 2013) |
Frame size is dependent on XY Gantry size, which is dependent on the bed size.
Extrusion
The Buildlog laser uses Misumi extrusion (HFS5-2020 and HFS5-2040), which is the same extrusion that the MakerSlide is based on, so very compatible.
The Blackhole laser uses Bosch Rexroth extrusion with glued on v-rails.