Difference between revisions of "DIY Laser/Frame"
Jump to navigation
Jump to search
(Created page with "Frame size is dependent on [[{{BASEPAGENAME}}/XY Gantry|XY Gantry]] size, which is dependent on the bed size. == Extrusion == The Buildlog laser uses [http://uk.misumi-ec.co...") |
m (Fowkc moved page DIY Laser/Frame to Project:DIY Laser/Frame) |
(No difference)
| |
Revision as of 00:23, 12 June 2014
Frame size is dependent on XY Gantry size, which is dependent on the bed size.
Extrusion
The Buildlog laser uses Misumi extrusion (HFS5-2020 and HFS5-2040), which is the same extrusion that the MakerSlide is based on, so very compatible.
The Blackhole laser uses Bosch Rexroth extrusion with glued on v-rails.