DIY Laser/Frame
< DIY Laser
Jump to navigation
Jump to search
Revision as of 11:50, 5 February 2019 by Danspencer101 (talk | contribs) (Danspencer101 moved page Project:DIY Laser/Frame to DIY Laser/Frame over redirect)
 |
This page has been tagged as requiring deletion. Please add a reason for the request (see see delete instructions.) Discuss request on the page's talk page. |
Frame size is dependent on XY Gantry size, which is dependent on the bed size.
Extrusion
The Buildlog laser uses Misumi extrusion (HFS5-2020 and HFS5-2040), which is the same extrusion that the MakerSlide is based on, so very compatible.
The Blackhole laser uses Bosch Rexroth extrusion with glued on v-rails.