DIY Laser/Frame
< DIY Laser
Jump to navigation
Jump to search
Revision as of 00:23, 12 June 2014 by Fowkc (talk | contribs) (Fowkc moved page DIY Laser/Frame to Project:DIY Laser/Frame)
Frame size is dependent on XY Gantry size, which is dependent on the bed size.
Extrusion
The Buildlog laser uses Misumi extrusion (HFS5-2020 and HFS5-2040), which is the same extrusion that the MakerSlide is based on, so very compatible.
The Blackhole laser uses Bosch Rexroth extrusion with glued on v-rails.