DIY Laser/Frame
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
The information on this page is NOT current. It retained for historical or archival purposes only. (January 2013) |
Frame size is dependent on XY Gantry size, which is dependent on the bed size.
Extrusion
The Buildlog laser uses Misumi extrusion (HFS5-2020 and HFS5-2040), which is the same extrusion that the MakerSlide is based on, so very compatible.
The Blackhole laser uses Bosch Rexroth extrusion with glued on v-rails.