Difference between revisions of "DIY Laser/XY Gantry"
(Created page with " RussleH and ~~~ took a look at the work is of the IMP Pick and Place at Ciseco<br/> Pictures here<br/> https://www.dropbox.com/sh/bhjxykpmvo0xxca/QPXxOIEow-/IMP Locking a ...") |
|||
Line 28: | Line 28: | ||
* for none cut moves | * for none cut moves | ||
* for etch/scan | * for etch/scan | ||
+ | |||
+ | 'Update 17/10/13:' | ||
+ | |||
+ | There has been discussion over the XY gantry system. | ||
+ | |||
+ | There are two main ideas: | ||
+ | *Use a belt drive | ||
+ | *Use ball screws | ||
+ | |||
+ | Most lower cost laser cutters use belt drives. | ||
+ | |||
+ | Most larger machines use ball screws. | ||
+ | |||
+ | Here are notes on the two ideas: | ||
+ | |||
+ | 'Belt Drive' | ||
+ | |||
+ | ''Belt Drive costs'' | ||
+ | |||
+ | 'Ball Screws' | ||
+ | |||
+ | ''Ball Screw costs'' | ||
+ | |||
How accurate do we need? | How accurate do we need? |
Revision as of 17:45, 17 October 2013
RussleH and 'RepRap' Matt (talk) took a look at the work is of the IMP Pick and Place at Ciseco
Pictures here
https://www.dropbox.com/sh/bhjxykpmvo0xxca/QPXxOIEow-/IMP
Locking a magnetic tape linear encoders, simlar to used on the PnP
This can give very high accuracy position feed back and at high speed
http://www.machine-dro.co.uk/digital-readout-systems/magnetic-tape-linear-encoders.html?p=1
Possible driver systems
- Fixed motor and looped belt to carriage
- Carriage mounted motor and fixed belt
- fixed motor driving a leadscrew
- fixed motor driving a ballscrew
Motors for each of the above could be one of the following
- DC motor
- stepper motor
- brushless servo motor
What speed do we need?
- for cut
- for none cut moves
- for etch/scan
'Update 17/10/13:'
There has been discussion over the XY gantry system.
There are two main ideas:
- Use a belt drive
- Use ball screws
Most lower cost laser cutters use belt drives.
Most larger machines use ball screws.
Here are notes on the two ideas:
'Belt Drive'
Belt Drive costs
'Ball Screws'
Ball Screw costs
How accurate do we need?