DIY Laser/XY Gantry

RussleH and 'RepRap' Matt (talk) took a look at the work is of the IMP Pick and Place at Ciseco
Pictures here
https://www.dropbox.com/sh/bhjxykpmvo0xxca/QPXxOIEow-/IMP

Locking a magnetic tape linear encoders, simlar to used on the PnP
This can give very high accuracy position feed back and at high speed

http://www.machine-dro.co.uk/digital-readout-systems/magnetic-tape-linear-encoders.html?p=1

Possible driver systems

• Fixed motor and looped belt to carriage
• Carriage mounted motor and fixed belt
• fixed motor driving a leadscrew
• fixed motor driving a ballscrew

Motors for each of the above could be one of the following

• DC motor
• stepper motor
• brushless servo motor

What speed do we need?

• for cut
• for none cut moves
• for etch/scan

Type of Gantry

There has been discussion over the XY gantry system.

There are two main ideas:

• Use a belt drive
• Use ball screws

Most lower cost laser cutters use belt drives.

Most larger machines use ball screws.

Here are notes on the two ideas:

Ball Screws

Ball Screw costs

How accurate do we need?