Difference between revisions of "Denford Lathe"
(Added some references and manual) |
|||
| Line 1: | Line 1: | ||
| − | + | [[User:Dclarke|Dclarke]] ([[User talk:Dclarke|talk]]) 08:56, 28 January 2014 (EST) | |
A benchtop Denford Novaturn CNC lathe | A benchtop Denford Novaturn CNC lathe | ||
| Line 13: | Line 13: | ||
There are a number of good 'howto' videos on youtube | There are a number of good 'howto' videos on youtube | ||
| − | See | + | See Part1 |
| − | and | + | and Part 2 |
The lathe used is the same as ours except that we have a 8 position automatic tool changer. | The lathe used is the same as ours except that we have a 8 position automatic tool changer. | ||
Revision as of 00:44, 19 December 2016
Dclarke (talk) 08:56, 28 January 2014 (EST)
A benchtop Denford Novaturn CNC lathe
The novaturn lathe has been in the space for some time and has had very little use to date it is NOT a scary hard to use machine and is avaialble for use by any member without induction.
Obviously take care when using, if you are unsure of anything ASK SOMEONE, a a good place to ask is the google group. If you have never used a Lathe or CNC machine at all before the learning curve can be a little steep but should be manageable.
There are a number of good 'howto' videos on youtube See Part1 and Part 2
The lathe used is the same as ours except that we have a 8 position automatic tool changer.
The novaturn software has a simulation mode' that lets you program a part an run it on the computer only to check all is well before you actually cut it out for real. This gives an easy confidence boost.
Other reference: Novaturn Manual is available HERE