Difference between revisions of "Donkey Saw"
Jump to navigation
Jump to search
(Created page with " ==Cutting fluid nozzle placement== The correct placement for the cutting fluid nozzle is pointing down over the blade about 1-2 inch behind the work being cut.<br/> The idea...") |
|||
| Line 13: | Line 13: | ||
| + | |||
| + | |||
| + | When too much coolant gets splashed out into the catch tray, it can be topped up with a small quantity of <i>fresh water</i>. When the mix gets too diluted, it can be topped up with a strong mix (to allow ongoing dilution) of cutting fluid and water as part of the general maintenance process by the tools team. | ||
[[Category:Tools and Equipment]] | [[Category:Tools and Equipment]] | ||
Revision as of 09:22, 8 August 2016
Cutting fluid nozzle placement
The correct placement for the cutting fluid nozzle is pointing down over the blade about 1-2 inch behind the work being cut.
The idea is to cool the blade and have it pull the fluid into the cut on the work
Fluid should not be splashing into the drip tray in large quantity!
When too much coolant gets splashed out into the catch tray, it can be topped up with a small quantity of fresh water. When the mix gets too diluted, it can be topped up with a strong mix (to allow ongoing dilution) of cutting fluid and water as part of the general maintenance process by the tools team.