Difference between revisions of "Fire Pong/Packing List"
Jump to navigation
Jump to search
(Created page with "== Packing List == System Components: * Distribution segment * 3 x small puffer segments + control boxes * 2 x large puffer segments, accumulators and control box (one shared...") |
|||
| Line 36: | Line 36: | ||
** PTFE tape | ** PTFE tape | ||
** Hose clamps / jubilee clips | ** Hose clamps / jubilee clips | ||
| − | ** | + | ** Soldering iron & solder |
| + | |||
| + | Spares: | ||
| + | * Spare fuses | ||
| + | * Spare sparkers | ||
| + | * Wire | ||
| + | * Arduino Pro Mini, header pins | ||
| + | * Micro SD card w/ RPi OS installed | ||
Revision as of 21:12, 4 July 2016
Packing List
System Components:
- Distribution segment
- 3 x small puffer segments + control boxes
- 2 x large puffer segments, accumulators and control box (one shared between large puffers)
- 2 x pilots for large puffers, low pressure hoses
- Main control box
- 2 x WiiMotes + spare batteries (2 AA er Wiimote)
- 2 x Oversized paddles
- 5 x 3m, 5mm propane hoses (orange, LH 3/8 Hex nut on both ends)
- 1 x 2m, 8mm propane hose (orange, LH 3/8 Hex nut on both ends)
- Propane cylinders
- Weed burner & full can of butane for it
- Bullhorn & spare batteries (8xC/R14's)
Tools:
- Spanners for:
- 4 bar regulator nut spanner
- 3/8 LH hose propane nut: 17mm
- 1/4 hex nipple: 14mm
- 1/2 hex nipple
- Flashback regulator nut: 19mm
- 1/4" ball valve body: 17mm
- 1/2" ball valve body
- Square gauge nuts: 14mm
- Screwdrivers for:
- Relay release screws
- Control boxes
- Terminal blocks
- Other:
- 2 x vice grips
- Leak detection spray
- Tea towels
- PTFE tape
- Hose clamps / jubilee clips
- Soldering iron & solder
Spares:
- Spare fuses
- Spare sparkers
- Wire
- Arduino Pro Mini, header pins
- Micro SD card w/ RPi OS installed