Difference between revisions of "Fire Pong/Packing List"
Jump to navigation
Jump to search
Line 1: | Line 1: | ||
== Packing List == | == Packing List == | ||
− | System Components | + | === System Components === |
* Distribution segment | * Distribution segment | ||
* 3 x small puffer segments + control boxes | * 3 x small puffer segments + control boxes | ||
Line 14: | Line 14: | ||
* Weed burner & full can of butane for it | * Weed burner & full can of butane for it | ||
* Bullhorn & spare batteries (8xC/R14's) | * Bullhorn & spare batteries (8xC/R14's) | ||
+ | |||
+ | === Tools === | ||
+ | ==== Spanners for ==== | ||
+ | * 4 bar regulator nut spanner | ||
+ | * 3/8 LH hose propane nut: 17mm | ||
+ | * 1/4 hex nipple: 14mm | ||
+ | * 1/2 hex nipple | ||
+ | * Flashback regulator nut: 19mm | ||
+ | * 1/4" ball valve body: 17mm | ||
+ | * 1/2" ball valve body | ||
+ | * Square gauge nuts: 14mm | ||
+ | ==== Screwdrivers for ==== | ||
+ | * Relay release screws | ||
+ | * Control boxes | ||
+ | * Terminal blocks | ||
− | + | ==== Other ==== | |
− | + | * 2 x vice grips | |
− | + | * Leak detection spray | |
− | + | * Tea towels | |
− | + | * PTFE tape | |
− | + | * Hose clamps / jubilee clips | |
− | + | * Soldering iron & solder | |
− | + | * Work light | |
− | + | * Work light charger (car & mains) | |
− | + | * Long extension lead | |
− | + | * Event shelter | |
− | + | * Tarp | |
− | + | * Stickers | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | Spares | + | === Spares === |
* Spare fuses | * Spare fuses | ||
* Spare sparkers | * Spare sparkers |
Revision as of 09:18, 6 July 2016
Packing List
System Components
- Distribution segment
- 3 x small puffer segments + control boxes
- 2 x large puffer segments, accumulators and control box (one shared between large puffers)
- 2 x pilots for large puffers, low pressure hoses
- Main control box
- 2 x WiiMotes + spare batteries (2 AA er Wiimote)
- 2 x Oversized paddles
- 5 x 3m, 5mm propane hoses (orange, LH 3/8 Hex nut on both ends)
- 1 x 2m, 8mm propane hose (orange, LH 3/8 Hex nut on both ends)
- Propane cylinders
- Weed burner & full can of butane for it
- Bullhorn & spare batteries (8xC/R14's)
Tools
Spanners for
- 4 bar regulator nut spanner
- 3/8 LH hose propane nut: 17mm
- 1/4 hex nipple: 14mm
- 1/2 hex nipple
- Flashback regulator nut: 19mm
- 1/4" ball valve body: 17mm
- 1/2" ball valve body
- Square gauge nuts: 14mm
Screwdrivers for
- Relay release screws
- Control boxes
- Terminal blocks
Other
- 2 x vice grips
- Leak detection spray
- Tea towels
- PTFE tape
- Hose clamps / jubilee clips
- Soldering iron & solder
- Work light
- Work light charger (car & mains)
- Long extension lead
- Event shelter
- Tarp
- Stickers
Spares
- Spare fuses
- Spare sparkers
- Wire
- Arduino Pro Mini, header pins
- Micro SD card w/ RPi OS installed