Fire Pong/Packing List

From Nottinghack Wiki
Jump to navigation Jump to search

Packing List

System Components

  • Distribution segment
  • 3 x small puffer segments + control boxes
  • 2 x large puffer segments, accumulators and control box (one shared between large puffers)
  • 2 x pilots for large puffers, low pressure hoses
  • Main control box
  • 2 x WiiMotes + spare batteries (2 AA er Wiimote)
  • 2 x Oversized paddles
  • 5 x 3m, 5mm propane hoses (orange, LH 3/8 Hex nut on both ends)
  • 1 x 2m, 8mm propane hose (orange, LH 3/8 Hex nut on both ends)
  • Propane cylinders: 3 x 13kg
  • Weed burner & full can of butane for it
  • Bullhorn & spare batteries (8xC/R14's)
  • Fire extinguisher: 2kg powder
  • Fire extinguisher: 6kg powder
  • Fire extinguisher: water (in case grass fire)
  • Laptop / netbook for log monitoring * power supply
  • Shortish ethernet cable

Tools

Spanners for

  • 4 bar regulator nut spanner
  • 3/8 LH hose propane nut: 17mm
  • 1/4 hex nipple: 14mm
  • 1/2 hex nipple
  • Flashback regulator nut: 19mm
  • 1/4" ball valve body: 17mm
  • 1/2" ball valve body
  • Square gauge nuts: 14mm

Screwdrivers for

  • Relay release screws
  • Control boxes
  • Terminal blocks

Other

  • 2 x vice grips
  • Leak detection spray
  • Tea towels
  • PTFE tape
  • Hose clamps / jubilee clips
  • Soldering iron & solder
  • Work light
  • Work light charger (car & mains)
  • Long extension lead
  • Event shelter
  • Tarp
  • Stickers
  • Cable ties for sparkers
  • Drill & bits

Spares

  • Spare fuses
  • Spare sparkers
  • Wire
  • Arduino Pro Mini, header pins
  • Micro SD card w/ RPi OS installed