Difference between revisions of "Fobco Bench Drill"

From Nottinghack Wiki
Jump to navigation Jump to search
 
(7 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{stub|date=February 2019}}
 
{{cleanup|reason=TODO: What's It For, Usage, Safety, Maintenance|date=February 2019}}
 
 
{{Tool
 
{{Tool
|image=
+
|image=File:Nottinghack_Tools_Fobco bench drill.jpg
 
|manufacturer=Fobco
 
|manufacturer=Fobco
 
|model=
 
|model=
 
|obtained=
 
|obtained=
|location=
+
|location=Metalworking Area
 
|team=Metalworking
 
|team=Metalworking
|induction=
+
|induction=No
 
}}
 
}}
 +
Classic British-made Bench drill located in the [[Metalworking Area]]
  
Classic British-made Bench drill for  in the metalworking area.
+
==Safety==
  
Chuck type and size.
+
Recommended PPE:
 +
*Safety Glasses - Hot, sharp swarf can be produced by this tool. Protect your eyes with a pair of Safety Glasses.  
  
Speeds.
+
Other Recommendations:
 +
*Do not wear loose clothing that may get caught and pull you into the spinning chuck.
 +
*Necklaces and Lanyards should also be removed before operating the tool for the same reason.  
  
Lubrication, and coolant usage.
+
==Chuck type and size==
 +
The drill is equipped with Jacobs Chuck.  
  
Cleaning Up.
+
==Speeds==
 +
Attached to the drill is a black plate that lists recommended speeds for different diameter drill bits. Generally speaking: Smaller drill bits require faster speeds, Larger bits require slower speed.
 +
Changing the speed of the drill is fairly easy and can be done in less than 2 minutes. There is a black information plate on the side of the drill that shows the resulting speed from each belt configuration.
 +
 
 +
===How to change the Speed===
 +
{{#widget:YouTube|id=jGFlm40cNw0|width=385|height=680}}
 +
 
 +
==Lubrication, and coolant usage==
 +
Using cutting paste whilst drilling metal is a good idea as it reduces the build up of heat, reduces chatter and can have a positive impact on tool life. You can find cutting paste on the benches at various points around the Metalworking Area.
 +
 
 +
==Cleaning Up==
 +
Cleaning up swarf generated by drilling can be done using the dustpan and brush on the tool board behind the metalworking bench.  
 +
{{note|Swarf is sharp, Handle with care}}
 
[[Category:Metalwork]]
 
[[Category:Metalwork]]

Latest revision as of 23:11, 24 February 2019

Fobco Bench Drill
Nottinghack Tools Fobco bench drill.jpg
Manufacturer Fobco
Model
Obtained
Location Metalworking Area
Team Metalworking
Induction Required No
Booking {{{booking}}}
Status Defunct
Tools:   all pageslistPower ToolsBroken tools     {{}}

Classic British-made Bench drill located in the Metalworking Area

Safety

Recommended PPE:

  • Safety Glasses - Hot, sharp swarf can be produced by this tool. Protect your eyes with a pair of Safety Glasses.

Other Recommendations:

  • Do not wear loose clothing that may get caught and pull you into the spinning chuck.
  • Necklaces and Lanyards should also be removed before operating the tool for the same reason.

Chuck type and size

The drill is equipped with Jacobs Chuck.

Speeds

Attached to the drill is a black plate that lists recommended speeds for different diameter drill bits. Generally speaking: Smaller drill bits require faster speeds, Larger bits require slower speed. Changing the speed of the drill is fairly easy and can be done in less than 2 minutes. There is a black information plate on the side of the drill that shows the resulting speed from each belt configuration.

How to change the Speed

Lubrication, and coolant usage

Using cutting paste whilst drilling metal is a good idea as it reduces the build up of heat, reduces chatter and can have a positive impact on tool life. You can find cutting paste on the benches at various points around the Metalworking Area.

Cleaning Up

Cleaning up swarf generated by drilling can be done using the dustpan and brush on the tool board behind the metalworking bench.

Note Note: Swarf is sharp, Handle with care