You're a member admin and a new member is asking to get their gatekeeper card set up. Here's how. If their payment hasn't been detected yet, they'll have to wait: Based on past experience, we don't set up cards for people that haven't paid membership yet (Nothing bad happened, people just got excited about membership, had no incentive to set it up if they were given access, then had their membership revoked after a while).
We have a box of suitable blank RFID cards on top of the safe, which are available to people for a £1 deposit (Goes in the cashbox). Additionally, a Nottingham City Library Card, Citycard, most student and university IDs, some work IDs, or any Oyster card will also work. Ski passes tend not to; neither do contactless debit cards.
RFID Card Setup
Log in to HMS, then click on Members in the top left.
From there, use the search box to find the right member:
Click on their name in the list of results:
If they're a current member, HMS will show a pin number for them, circled in red below. Remember or make a note of it. n.b., the member doesn't require the PIN to access the hackspace, it's a one use number for setting tying and RFID card to their account.
Go to Gatekeeper and place the RFID card over the sensor. A blank card is shown here, but many others work (some listed above).
Gatekeeper will beep and display "Access Denied" on the LCD if the card is usable. Input the PIN number before the LCD resets, the card will then be tied to the member and, from now on, will unlock the hackspace door when presented to the sensor. The LCD will also display "Welcome [MEMBER NAME]" by default; members can edit their unlock message by logging into HMS and editing their profile. n.b., it's worth demonstrating opening the door to the new member at the time of card setup. The maglock is very strong; pushing it open when the lock isn't on the latch requires considerably more force than when it is.