Difference between revisions of "Laser Cut COVID-19 PPE/Instructions for inducted laser users"
m (Danspencer101 moved page LaserCutCOVID-19 PPE/Instructions for inducted laser users to Laser Cut COVID-19 PPE/Instructions for inducted laser users: Add spaces to title (Left redirect as the link has been shared))
Revision as of 00:51, 5 April 2020
Members that are inducted on the laser cutter can help with the manufacture of the Laser Cut Covid-19 face shields as follows:
Firstly, please familiarise yourself with the project by reading this wiki page LaserCutCOVID-19_PPE
Please use this channel to let others know when you are planning to go in, what quantity you've cut and what materials are still left.
Requesting access to the space
During the lockdown, you will need to request access from the trustees, before visiting the space. Please follow the process here: Coronavirus_guidelines
You can book a 2 hour slot on the laser as normal, but this is not necessary as the trustees are presently limiting access to one member at a time, so the laser will not be in use by anyone else.
RFID card for use on the laser
A RFID card for use on the laser when cutting parts for this project is located in the box marked "Covid-19 Volunteers". This box should be on the cutting table. Please ensure the card is returned after use.
Our stock of Polypropylene sheets is on the cutting table in the Studio
There is a COVID19PPE folder on the desktop of the laser PC.
Please use the "READYFORLASERCUT.ecp" file located in this folder.
The file doesn't use the full sheet. Please set the origin to the top right of the sheet. After cutting please put the unused part in the pile of off-cuts. These will be useful later.
After cutting you will find the parts have a white dusty deposit and possibly some soot (from the laser bed) on them. Use the anti-bacterial wipes to clean the parts. Please clean the parts thoroughly, but use the wipes sparingly as we have a limited supply at present.
After cutting and cleaning, the parts can be assembled by following the process here: LaserCutCOVID-19_PPE
PVC sheets and a hole punch should be on the cutting table in the studio.
Please leave finished items in a box on the cutting table in the Studio with a note showing the quantity.
Once done, please also post an update in the #laser_cv19_shield channel on slack.