Laser Cut COVID-19 PPE/Instructions for inducted laser users

From Nottinghack Wiki
Jump to navigation Jump to search

Members that are inducted on the laser cutter can help with the manufacture of the Laser Cut Covid-19 face shields as follows:

Project details

Firstly, please familiarise yourself with the project by reading this wiki page LaserCutCOVID-19_PPE

Slack channel

Please join the #laser_cv19_shield channel in slack for coordination. If you are not on slack, you can join here: Nottinghack Slack.

Please use this channel to let others know when you are planing to go in, what quantity you've cut and what materials are still left.

Requesting access to the space

During the lockdown, you will need to request access from the trustees, before visiting the space. Please follow the process here: Coronavirus_guidelines

You can book a 2 hour slot on the laser as normal, but this is not necessary as the trustees are presently limiting access to one member at a time, so the laser will not be in use by anyone else.

RFID card for use on the laser

During the lock down period the RFID card used by the laser maintainers will be left by the laser cutter. Please use this card on the laser when cutting parts for this project, rather than charging the time to your own account.

Material

Our stock of Polypropylene sheets is on the cutting table in the Studio

Stock of polyproplene

Laser file

There is a COVID19PPE folder on the desktop of the laser PC.

Please use the "READYFORLASERCUT.ecp" file located in this folder.

CV19 folder on desktop

LaserCut53 view

The file doesn't use the full sheet. Please set the origin to the top right of the sheet. After cutting please put the unused part in the pile of off-cuts. These will be useful later.

Cleaning

After cutting you will find the parts have a white dusty deposit and possibly some soot (from the laser bed) on them. Use the anti-bacterial wipes to clean the parts. Please clean the parts thoroughly, but use the wipes sparingly as we have a limited supply at present.

Wipes, PVC sheets and hole punch

Assembly

After cutting and cleaning, the parts can be assembled by following the process here: LaserCutCOVID-19_PPE

PVC sheets and a hole punch should be on the cutting table in the studio.

Please leave finished items in a box on the cutting table in the Studio with a note showing the quantity.

Once done, please also post an update in the #laser_cv19_shield channel on slack.