Difference between revisions of "Laser Etching Stainless Steel"
Jump to navigation
Jump to search
m |
(space at top of article) |
||
(4 intermediate revisions by one other user not shown) | |||
Line 1: | Line 1: | ||
− | |||
− | |||
− | |||
{{Project | {{Project | ||
|name=Laser Etching Stainless Steel | |name=Laser Etching Stainless Steel | ||
|primary=[[User:Msemtd|Michael Erskine]] | |primary=[[User:Msemtd|Michael Erskine]] | ||
|created=24/03/2016 | |created=24/03/2016 | ||
− | |status= | + | |status=Complete |
+ | |type=member | ||
}} | }} | ||
− | |||
Tests of laser etching stainless steel using the alcohol and plaster process. | Tests of laser etching stainless steel using the alcohol and plaster process. | ||
Line 18: | Line 15: | ||
Using cheap stainless steel hip flasks and a lasered jig to hold the flask in exact position with respect to a known origin, I worked out a good process running a very slow etch. Two etches were done on the first hip flask at different rates: one for the lettering and one for the large image. The etch time for the image was over an hour! | Using cheap stainless steel hip flasks and a lasered jig to hold the flask in exact position with respect to a known origin, I worked out a good process running a very slow etch. Two etches were done on the first hip flask at different rates: one for the lettering and one for the large image. The etch time for the image was over an hour! | ||
+ | |||
+ | [[Category:Michael's Projects]] |
Latest revision as of 06:04, 10 February 2019
Laser Etching Stainless Steel | |
---|---|
Primary Contact | Michael Erskine |
Created | 24/03/2016 |
Status | Complete |
Type | Members Project |
QR code |
Tests of laser etching stainless steel using the alcohol and plaster process.
I was compelled to attempt this hack found on Hackaday: http://hackaday.com/2014/12/25/laser-etch-stainless-with-only-plaster-alcohol/
Using cheap stainless steel hip flasks and a lasered jig to hold the flask in exact position with respect to a known origin, I worked out a good process running a very slow etch. Two etches were done on the first hip flask at different rates: one for the lettering and one for the large image. The etch time for the image was over an hour!