Laser Etching Stainless Steel

From Nottinghack Wiki
Revision as of 01:14, 20 January 2019 by Danspencer101 (talk | contribs) (probably complete rather than dormant)
Jump to navigation Jump to search

Laser Etching Stainless Steel
Primary Contact Michael Erskine
Created 24/03/2016
Completed {{{completeddate}}}
Dormant {{{dormantdate}}}
Version {{{version}}}
Members {{{members}}}
Manufacturer {{{manufacturer}}}
Model {{{model}}}
Location [[{{{location}}}]]
Status Complete
Type Undefined
Live Status {{{livestatus}}}
QR code

Tests of laser etching stainless steel using the alcohol and plaster process.

I was compelled to attempt this hack found on Hackaday:

Using cheap stainless steel hip flasks and a lasered jig to hold the flask in exact position with respect to a known origin, I worked out a good process running a very slow etch. Two etches were done on the first hip flask at different rates: one for the lettering and one for the large image. The etch time for the image was over an hour!