Cookies help us deliver our services. By using our services, you agree to our use of cookies.OK

Difference between revisions of "Laser cutter/Inductions"

Line 133: Line 133:
 
| 37 || Ric Briney|| NO || TBA || NO
 
| 37 || Ric Briney|| NO || TBA || NO
 
|-
 
|-
 
+
| 38 ||Kai Pays || NO || TBA || NO
 
|}
 
|}
  
 
[[Category:Tools and Equipment]]
 
[[Category:Tools and Equipment]]

Revision as of 09:33, 29 May 2012

Induction on the laser Cutter/Engraver

I will be conducting Induction Sessions on the new Laser Cutter Engraver at the Nottingham Hackspace (starting in September 2011).

These are one-on-one sessions. You may bring a small laser project if you wish though you must check that your materials are suitable for a laser cutting or etching. Otherwise we'll cut some paper/card/ply for you to show that you aren't going to destroy the laser or coat the mirrors in gunk. Inductions cost £20.

Initially the cost of using the laser will be a donation of £1 for 10 minutes (the rule of thumb here is time using the machine including the laptop NOT just cutting or etching time so ideally you'll prepare your files elsewhere).

Laser Costs

# ITEM COST
1 10 MINS £1
2 30 MINS £3
3 1 HOUR £6
4 A4 Ply £2+
5 PERSPEX Sheet email me

I will also be arranging an access diary for the laser and some simple rules of thumb. Shortly I will post online tutorials too.

Please use the donation box on the table next to the laser - NOTE: This money goes into the laser fund ONLY and not to the Hackspace.

INDUCTION PROGRAM

If you have a small project in mind we can use it as part of the induction but please check the matterials you would like to etch or cut are suitable for the laser. The induction is partly about keep you and the others around you safe... but mostly about NOT BREAKING THE LASER!

The induction will include:

  • Setting up and Switching on safely (with out breaking it) so you

don't die

  • Testing alignment of the laser
  • Introduction to NewlyDraw software (this is the software that the

machine uses)

  • Setting up your XY axis, placing your work piece and checking the

draw frame

  • Etching
  • Cutting
  • How to convert an image file to dxf and import it into NewlyDraw
  • Shutting down and tidying up


Laser Induction Sign-Ups

# Name Paid When Complete
1 Spencer YES 10/10/11 YES
2 James H YES 28/09/2011 YES
3 David YES 2/10/2011 YES
4 Mouse NO TBA NO
5 Suzanne NO TBA NO
6 AJ YES 3/10/2011 YES
7 Ben YES 10/10/11 YES
8 Tony YES 04/10/11 19:30 YES
9 Jake YES 05/10/11 YES
10 Joe YES 05/10/11 YES
11 RepRap Matt YES N/A YES
12 Chunky YES 05/10/11 YES
13 Michael E YES 08/10/2011 YES
14 Sharpie YES TBA YES
15 James F YES Monday 3rd October, 1830 YES
16 Mark YES ? YES
17 Pip NO TBA NO
18 John YES Tuesday 4th October, 19:00 YES
19 Ross NO TBA NO
20 Kate YES 03/10/2011 YES
21 Nicola NO TBA NO
22 Gareth H NO TBA NO
23 Hayley YES TBA NO
24 Becky YES 10/10/11 YES
25 Matt P YES 03/11/11 YES
26 Andrew A NO TBA NO
27 Aran YES 22/12/2011 YES
28 Tom NO TBA NO
29 JH NO TBA NO
30 Liam Woodgates YES 2/5/12 (Matt Little) YES
31 Becky Evers YES 2/5/12 (Matt Little) YES
32 Mike Degg YES 2/5/12 (Matt Little) YES
33 Tom Gwynne YES (April the something) YES
34 Andy Thorpe YES 17:25, 18 May 2012 YES
35 Marcus NO TBA NO
36 xxx NO TBA NO
37 Ric Briney NO TBA NO
38 Kai Pays NO TBA NO