Laser cutter/Inductions/Program

From Nottinghack Wiki

< Laser cutter‎ | Inductions

Revision as of 12:15, 29 May 2014 by James (talk | contribs) (Created page with "The induction program is there to ensure a new user can use the laser cutter safely and effectively. You '''do not'' need to follow this step by step, but should include all ...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

The induction program is there to ensure a new user can use the laser cutter safely and effectively.

You 'do not need to follow this step by step, but should include all of the material when running an induction. Inductions will use up your laser time initially. To get this time back onto your card, please some steps to go here

Setting up and Switching on safely

Testing alignment of the laser

Introduction to the cutting software

Setting up your XY axis, placing your work piece and checking the draw frame

Engraving

Cutting

Suitable file types and how to convert them

Shutting down

Retrieved from "https://wiki.nottinghack.org.uk/index.php?title=Laser_cutter/Inductions/Program&oldid=8302"