Difference between revisions of "Laser cutter/Materials"
Jump to navigation
Jump to search
(New page. Information on thin cardboard.) |
m (→Thin Cardboard) |
||
| Line 5: | Line 5: | ||
=== Thin Cardboard === | === Thin Cardboard === | ||
| − | Cutting Speed: 30 mm/s | + | *Cutting Speed: 30 mm/s |
| − | + | *Laser Current: 4mA | |
| − | Laser Current: 4mA | ||
| − | |||
These values were found using with 160gsm black card. Other gsm values may require changes to the speed and power. | These values were found using with 160gsm black card. Other gsm values may require changes to the speed and power. | ||
Revision as of 13:51, 10 October 2011
Introduction
This page is a list of materials that can be cut on the Nottinghack laser cutter, along with information on cutting speeds and power settings. Other useful information is also provided.
Thin Cardboard
- Cutting Speed: 30 mm/s
- Laser Current: 4mA
These values were found using with 160gsm black card. Other gsm values may require changes to the speed and power.