Difference between revisions of "Old Mini Mill"
| Line 24: | Line 24: | ||
The spindle speed is not stable - this is a known problem with this particular kind of mill. May need attention to the speed control pot, or a replacement controller. | The spindle speed is not stable - this is a known problem with this particular kind of mill. May need attention to the speed control pot, or a replacement controller. | ||
| + | |||
| + | [[Category:Tools_and_Equipment]] | ||
Revision as of 17:03, 8 June 2014
This is a bench-top OSAKI MMD250 milling machine received as a donation (was being scrapped!)
Looks Like
Specification
This is an 'X2' mini mill, intended for DIY use, available under a number of different supplier identities. This particular one is supplied by Cromwell Tools
A copy of the user manual is available in the Hackspace, or can be downloaded.
Tooling
There is a 6mm solid carbide end mill. Other suitable tools may be found in the Bridgeport Mill area.
Safety
Do not, ever, use an ordinary Jacobs-type drill chuck to hold milling tools. There is a set of 3 collet chucks with a (home-made) drawbar which is a much more secure and safe way of holding such tools (a drill-chuck is fine when the operating force is along the axis, but will loosen dangerously if sideways forces are applied).
Issues
The spindle speed is not stable - this is a known problem with this particular kind of mill. May need attention to the speed control pot, or a replacement controller.