Old Mini Mill
 |
This page is a stub. You can help by expanding it! This page is included in the list of stub pages. |
Dclarke (talk) 04:58, 12 January 2014 (EST)
This is a bench-top OSAKI MMD250 milling machine received as a donation (was being scrapped!)
Looks Like
(photo to follow)
Specification
This is an 'X2' mini mill, intended for DIY use, available under a number of different supplier identities. This particular one is supplied by Tools
A copy of the user manual is available in the Hackspace, or can be [1].
Tooling
There is a 6mm solid carbide end mill. Other suitable tools may be found in the Bridgeport Mill area.
Safety
Do not, ever, use an ordinary Jacobs-type drill chuck to hold milling tools. There is a set of 3 collet chucks with a (home-made) drawbar which is a much more secure and safe way of holding such tools (a drill-chuck is fine when the operating force is along the axis, but will loosen dangerously if sideways forces are applied).
Issues
The spindle speed is not stable - this is a known problem with this particular kind of mill. May need attention to the speed control pot, or a replacement controller.