Difference between revisions of "Pillar Drill"
Jump to navigation
Jump to search
(Removed non descript update tag) |
|||
| (21 intermediate revisions by 13 users not shown) | |||
| Line 1: | Line 1: | ||
| − | + | {{Tool | |
| + | |image=File:Pillar_drill.jpg | ||
| + | |manufacturer=Sealey | ||
| + | |model=GDM1630FR | ||
| + | |obtained=[[/Pillar Drill pledge drive circa 2013|Pledge drive]] | ||
| + | |obtaineddate= | ||
| + | |location=Dusty Area | ||
| + | |team=Woodworking | ||
| + | |induction=No | ||
| + | |defunct= | ||
| + | |defunctdate= | ||
| + | }} | ||
| + | This tool is a Sealey GDM1630FR radial arm pillar drill. | ||
| − | + | == Usage == | |
| − | + | Please remember to lock the table lift before drilling. The rack and pinion is not enough to resist downwards drilling pressure, and rack bending and breakage occurs if the rack is expected to take the load. | |
| − | + | Also, make sure that the drill and table area adjusted to ensure that the drill passes through a hole in the table, rather than drilling in to it. | |
| − | + | == Maintenance == | |
| − | + | On the 21st August 2016, a replacement rack was fitted, together with new chuck guard and a missing handle knob replaced. | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
[[Category:Tools and Equipment]] | [[Category:Tools and Equipment]] | ||
Latest revision as of 01:24, 20 April 2019
| Pillar Drill | |
|---|---|
 | |
| Manufacturer | Sealey |
| Model | GDM1630FR |
| Obtained | Pledge drive |
| Location | Dusty Area |
| Team | Woodworking |
| Induction Required | No |
| Tools: all pages • list • Power Tools • Broken tools {{}} | |
This tool is a Sealey GDM1630FR radial arm pillar drill.
Usage
Please remember to lock the table lift before drilling. The rack and pinion is not enough to resist downwards drilling pressure, and rack bending and breakage occurs if the rack is expected to take the load.
Also, make sure that the drill and table area adjusted to ensure that the drill passes through a hole in the table, rather than drilling in to it.
Maintenance
On the 21st August 2016, a replacement rack was fitted, together with new chuck guard and a missing handle knob replaced.