Resin Calibration Charts

From Nottinghack Wiki
Revision as of 17:17, 28 November 2019 by Moop (talk | contribs)
Jump to navigation Jump to search

A page to collate resin calibration charts for the AnyCubic Photon 3D printer.

It is possible to print a Calibration Chart for a specific layer height with your resin to find a good starting point.

This process requires changing the printer's settings, printing one or more charts, and then restoring the previous settings. **Please make sure you are confident that you can restore the standard settings before starting this process.**

AnyCubic Translucent Green with 20 micron layers
AnyCubic Translucent Green with 50 micron layers
AnyCubic Orange with 20 micron layers
AnyCubic Orange with 50 micron layers