Resin Calibration Charts

From Nottinghack Wiki
Revision as of 17:19, 28 November 2019 by Moop (talk | contribs)
Jump to navigation Jump to search

A page to collate resin calibration charts for the Anycubic Photon 3D printer.

It is possible to print a Calibration Chart for a specific layer height with your resin to find a good starting point.

This process requires changing the printer's settings, printing one or more charts, and then restoring the previous settings. **Please make sure you are confident that you can restore the standard settings before starting this process.**

AnyCubic Translucent Green with 20 micron layers
AnyCubic Translucent Green with 50 micron layers
AnyCubic Orange with 20 micron layers
AnyCubic Orange with 50 micron layers

As an opaque resin the AnyCubic Orange appears to require a much longer cure time (20s at 20 microns) and is very sensitive to bed levelling.

Test cards for AnyCubic Translucent Yellow resin will be uploaded when I am back in the space to photograph them.

Currently the test cards are being kept near the printer for ease of reference.