Rubik's Cube Footrest
Jump to navigation
Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Rubik's Cube Footrest | |
---|---|
Primary Contact | Michael Erskine |
Created | 01/02/2012 |
Status | Dormant |
Type | Members Project |
QR code |
A small piece of custom furniture in the style of a Rubik's Cube.
- scale and design
- A Rubik's Cube is typically 58mm along one edge. Each edge is subdivided into 3.
- the footrest wants to be a convenient height for use as a small coffee table as well as a good height for a typical couch.
- scrap 9mm MDF sheet cut to 33cm square
- scrap softwood timber for corner strengthening
- hinges
- hidden - want to lift without damaging the back overhanging edge
- http://www.screwfix.com/p/easy-mount-hinges-90-pack-of-2/38662
- casters/gliders
- edges - nicely rounded
- quadrant or routing
- surface detail and finishing
- routing for 3x3x3 divisions
- filling and painting - black non-gloss matt vinyl
- GripFill - can it be sanded? http://www.screwfix.com/p/gripfill-350ml/10261
- stickers - use vinyl from old stationery - binders and dividers
- coasters for white stickers
- decor and detail on underside and inside?