Difference between revisions of "SE-CNC-1/Inductions"
m (→Intro) |
|||
| Line 21: | Line 21: | ||
===First Chopping Board=== | ===First Chopping Board=== | ||
| − | + | *Inductee is shown how to set up job in machine. | |
| − | + | *Inductee shown software side of the setup | |
| − | + | *Run Job | |
| − | + | *Show inductee in cycle tasks. | |
| − | + | **Stop and resume | |
| − | + | **Tool Changes | |
| − | + | **Resetting Z-height after tool change | |
===Second Chopping board=== | ===Second Chopping board=== | ||
Revision as of 01:19, 6 March 2019
 |
This page is a draft and is probably being actively worked on. Feel free to contribute, or make suggestions on the talk page. However, be aware that details are subject to change. (This page was last edited 6 March 2019 @ 01:19 GMT) |
Induction will require a set of two chopping boards. These are easy to obtain and have known dimensions. IKEA has some fairly cheap ones that come in 2packs (one could be used for training, the other one for the inductee to work on to show understanding). This is ideal because it means we know what the raw stock is going to look like every time and we know where it is safe to put clamping points and datum locations; should lead to a smooth induction process.
It is expected that the inductee will have some experience with CNC Routing/Milling on the small CNC Mill prior to operating the SE-CNC-1 Mill.
Outline Plan
Start Induction
Intro
- Point out key features and names for key components
- Where are the tools and accessories
- Make it clear what the difference between a Model and G-Code are
- Provide G-Code and "technical" drawing for induction task showing datums
- How to turn on the machine
- Location of E-Stops, any interlocks and safety features
- PPE - Probably:
- Safety glasses
- Hearing Protection
First Chopping Board
- Inductee is shown how to set up job in machine.
- Inductee shown software side of the setup
- Run Job
- Show inductee in cycle tasks.
- Stop and resume
- Tool Changes
- Resetting Z-height after tool change
Second Chopping board
-Watch inductee set up the job and provide tips if required -Let them have complete control of software -Run job -Let some of the job run then randomly and without warning hit the e-stop -Let inductee resume the job
Asset care
-Cleaning machine -Bin Locations -Swarf/ sawdust dumping places
Wrap Up
Any questions
End Induction
Induction Tasks
Task 1