SLA Printer Pledge
Pledge drive to buy a Monoprice MP Mini SLA LCD High Resolution Resin 3D Printer (£249) and parts for wash/cure stations (~£30)
Total cost: £279.00
This SLA 3D printer provides a higher resolution output than is possible with the Ultimaker Original+ (which is filament based). The maximum build size is 118 * 65 * 110mm.
Stretch Goal/Additional Costs
Printed parts need to be washed. They then need to be cured, preferably in an enclosed environment with a powered filter. Costs estimated at £30, some parts may already be available.
Resin costs: £20/500ml, plus wastage
List of pledges
Please post on the google group mailing list if you really, truly have forgotten your HMS password and need someone else to update this.
Please pay with the reference SLAPRINTER-XX where XX is your initials and list the reference used below.
| Who | How Much | Paid? | Method Paid |
|---|---|---|---|
| James Taylor | £15 | No | - |
| Andrew Walters | £15 | No | - |
| David Spence | £30 | No | - |
| Lee Hutchison | £20 | No | - |
| Jon H | £10 | No | - |
| Dan S | £10 | No | - |
| Ian D | £15 | No | - |
| Ed Podgorski (see talk) | £15 | No | - |
| Alex Sokolov | £20 | No | - |
| Steve Barnett | £20 | No | - |
| James Fowkes | £20 | No | - |
| User | £0 | No | - |
Note: Please try to make payment asap once target is met.
Further discussion
For discussion see:
Specs
| Model | 35435 |
| Dimensions (mm) | 260 * 260 * 385 |
| Max Print Size(mm) | 118 * 6.5 * 110 |
| Resolution | 0.05mm |
| UV Wavelength | 405nm |
Videos
Monoprice Mini LCD SLA Resin Printer- a Closer Look:
Printer setup, and file slicing: