Difference between revisions of "Silvertail A0 Laser cutter"

From Nottinghack Wiki
Jump to navigation Jump to search
(+differences)
(fix links)
 
Line 15: Line 15:
 
=== A0 Specific Information ===
 
=== A0 Specific Information ===
  
What's the same as the [[Greyfin A2 Laser cutter]]:
+
What's the same as the [[Greyfin A2 Laser Cutter]]:
  
 
* The password for the new PC (Log in using the "Laser-User" account)
 
* The password for the new PC (Log in using the "Laser-User" account)
Line 25: Line 25:
 
* Maximum power setting 65% to extend laser tube life
 
* Maximum power setting 65% to extend laser tube life
  
Differences to the [[Greyfin A2 Laser cutter]] are:
+
Differences to the [[Greyfin A2 Laser Cutter]] are:
  
 
* The hackspace owns this laser cutter
 
* The hackspace owns this laser cutter

Latest revision as of 21:03, 13 November 2019

Silvertail A0 Laser cutter
A0 laser cutter.jpg
Manufacturer Just Add Sharks
Model Silvertail A0
Obtained Purchased through Pledge Drive early 2014
Location Laser Area
Team Laser
Induction Required Yes (use request form)
Booking Yes (use HMS)
Status Defunct
Tools:   all pageslistPower ToolsBroken tools     {{}}

The Silvertail A0 Laser cutter is the main laser cutter the Hackspace owns. It requires both induction and booking / paying for use. See the Laser cutter page for usage instructions (LaserCut) and for information on inductions and bookings.

A0 Specific Information

What's the same as the Greyfin A2 Laser Cutter:

  • The password for the new PC (Log in using the "Laser-User" account)
  • Lasercut 5.3 software
  • Control panel on the laser
  • Cost to use (£3 / hour)
  • Bookable via HMS, limited to one 2 hour slot
  • Access controlled by RFID card reader
  • Maximum power setting 65% to extend laser tube life

Differences to the Greyfin A2 Laser Cutter are:

  • The hackspace owns this laser cutter
  • It has a 1200 x 900 mm (approx A0) cutting area, ideal for larger jobs
  • Power is 80W so if you use it compared to the A2 use the whiteboard speeds
  • Focus tool is larger
  • It has a red aiming dot
  • The extractor is now shared by both lasers. It comes on when the first laser turns on, and switches off 60 seconds after the last laser turns off
  • If you have any laser time credits (from the original pledge drive for the A0 or a recent induction) for the time being this can only be used on the A0 laser not the A2 laser