Uploads by Danspencer101
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 12:33, 29 December 2018 | Les Plywood - 3D Printed Stop Bar.jpg (file) |  |
111 KB | 1 | |
| 12:26, 29 December 2018 | Les Plywood - Stop Bar3.PNG (file) |  |
338 KB | 1 | |
| 12:26, 29 December 2018 | Les Plywood - Stop Bar2.PNG (file) |  |
457 KB | 1 | |
| 12:26, 29 December 2018 | Les Plywood - Stop Bar1.PNG (file) |  |
499 KB | 1 | |
| 01:58, 27 December 2018 | Les Plywood - Fret Positions.PNG (file) |  |
247 KB | 1 | |
| 01:05, 27 December 2018 | Les Plywood - Fret wire DHP-20.jpg (file) |  |
120 KB | 1 | |
| 23:08, 22 December 2018 | Les Plywood - Body after Sanding4.jpeg (file) |  |
1.94 MB | 1 | |
| 23:07, 22 December 2018 | Les Plywood - Body after Sanding3.jpeg (file) |  |
2.01 MB | 1 | |
| 23:05, 22 December 2018 | Les Plywood - Body after Sanding2.jpeg (file) |  |
2.14 MB | 1 | |
| 22:56, 22 December 2018 | Les Plywood - Body after Sanding.jpeg (file) |  |
1.8 MB | 1 | |
| 22:53, 22 December 2018 | Les Plywood - Body Before Sanding2.jpeg (file) |  |
2.92 MB | 1 | |
| 22:51, 22 December 2018 | Les Plywood - Body Before Sanding.jpeg (file) |  |
2.85 MB | 1 | |
| 12:17, 22 December 2018 | 3D Print output from Fusion.PNG (file) |  |
146 KB | This menu is access via File -> 3D Print | 1 |
| 11:27, 22 December 2018 | CAM Workspace Fusion360.PNG (file) |  |
95 KB | 1 | |
| 02:23, 22 December 2018 | CNCHanSolo-Complete3.jpeg (file) |  |
421 KB | 1 | |
| 02:23, 22 December 2018 | CNCHanSolo-Complete2.jpeg (file) |  |
335 KB | 1 | |
| 02:21, 22 December 2018 | CNCHanSolo-Complete1.jpeg (file) |  |
448 KB | 1 | |
| 02:11, 22 December 2018 | HanSolo Finishing Pass simulation.gif (file) |  |
1,001 KB | 1 | |
| 01:58, 22 December 2018 | Han Solo Toolpath Simulation.gif (file) |  |
769 KB | 1 | |
| 01:47, 22 December 2018 | HanSolo-Stock Set-up.PNG (file) |  |
216 KB | 1 | |
| 01:45, 22 December 2018 | 6mm Ball Nose Mill.PNG (file) |  |
95 KB | 1 | |
| 01:44, 22 December 2018 | 3mm Ball Nose Mill.PNG (file) |  |
94 KB | 1 | |
| 00:35, 22 December 2018 | Les Plywood - Stage 2 Gluing Set-up (Curve Top).jpeg (file) | .jpeg) |
316 KB | 1 | |
| 00:33, 22 December 2018 | Les Plywood - Flat Top Post Glue.jpeg (file) |  |
269 KB | 1 | |
| 00:32, 22 December 2018 | Les Plywood - Pickup Selector Pocket.jpeg (file) |  |
207 KB | 1 | |
| 00:30, 22 December 2018 | Les Plywood - Electronics Pocket.jpeg (file) |  |
238 KB | 1 | |
| 17:28, 21 December 2018 | Les Plywood Gluing 3.jpeg (file) |  |
240 KB | 1 | |
| 17:26, 21 December 2018 | Les Plywood Gluing 2.jpeg (file) |  |
1.2 MB | 1 | |
| 17:25, 21 December 2018 | Les Plywood Gluing 1.jpeg (file) |  |
1.11 MB | 1 | |
| 17:14, 21 December 2018 | LesPlywood Inkscape.PNG (file) |  |
211 KB | 1 | |
| 17:09, 21 December 2018 | Export to Sketches to DXF.PNG (file) |  |
1.06 MB | LES PLYWOOD PROJECT | 1 |
| 17:08, 21 December 2018 | Les Plywood DXF Sketches.png (file) |  |
1.06 MB | 1 | |
| 17:03, 21 December 2018 | Les Plywood Model.gif (file) |  |
400 KB | Fusion 360 CAD model of Les Plywood Model | 1 |
| 08:41, 6 December 2018 | Dans Head.gif (file) |  |
3.48 MB | Printed on my CR-10s | 1 |
| 00:34, 6 December 2018 | Kinect4.PNG (file) |  |
1.12 MB | 1 | |
| 00:32, 6 December 2018 | Kinect3.jpg (file) |  |
106 KB | Camera Setup | 1 |
| 00:14, 6 December 2018 | Kinect Scan.gif (file) |  |
1.82 MB | Lower Res for animated thumbnail? | 2 |
| 00:07, 6 December 2018 | Kinect2.PNG (file) |  |
1.61 MB | Skanect | 1 |
| 00:07, 6 December 2018 | Kinect1.PNG (file) |  |
347 KB | 1 | |
| 01:43, 4 December 2018 | Geocache Boxes.jpg (file) |  |
114 KB | 3D Printed on Creality CR-10S | 1 |
| 01:42, 4 December 2018 | Geocache Jet.jpg (file) |  |
98 KB | 3D Printed on CR-10S | 1 |
| 01:40, 4 December 2018 | NERF1.jpg (file) |  |
668 KB | Stryfe with dart counter via IR Light gate built into muzzle | 1 |
| 01:40, 4 December 2018 | NERF2.jpg (file) |  |
808 KB | Stryfe with dart counter via IR Light gate built into muzzle | 1 |
| 01:36, 4 December 2018 | Les Paul 4.jpeg (file) |  |
3.1 MB | Finished Rear | 1 |
| 01:35, 4 December 2018 | Les Paul 3.jpeg (file) |  |
2.93 MB | Finished | 1 |
| 01:31, 4 December 2018 | Les Paul 2.jpeg (file) |  |
787 KB | test fitting hardware | 1 |
| 01:28, 4 December 2018 | Les Paul 1.jpeg (file) |  |
755 KB | Routing out cable channels | 1 |
| 01:24, 4 December 2018 | Danspencer101.JPG (file) |  |
41 KB | 1 | |
| 15:43, 2 December 2018 | Screenshot - 021218 2.png (file) |  |
128 KB | Load G-code into GMOCCAPY | 1 |
| 15:42, 2 December 2018 | Screenshot - 021218 1.png (file) |  |
120 KB | CNC Auto Mode | 1 |
