Difference between revisions of "Stayer"
Jump to navigation
Jump to search
m (→Looks like) |
(→Issues: remove intermittent issue. Seems fine) |
||
| (4 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
| − | {{ | + | {{Tool |
| + | |image=File:Tool Stayer Chopsaw.jpeg | ||
| + | |manufacturer=Stayer | ||
| + | |model=TF84 | ||
| + | |obtained= | ||
| + | |obtaineddate= | ||
| + | |location=Metalworking Area | ||
| + | |team=Metalworking | ||
| + | |induction=No | ||
| + | |defunct= | ||
| + | |defunctdate= | ||
| + | }} | ||
| − | Stayer cutoff saw. | + | '''Stayer''' cutoff saw (or 'cold cut chopsaw'). Usually on the metalwork bench, this is a ''slow speed'' circular saw for cutting metal. |
| − | + | Intended for cutting ''with a coolant supply'' for which there is a pump - to be commissioned and checked. | |
| − | + | The blade is made of High Speed Steel, and these are cut and sharpened to order by [http://www.lmcuttingtools.co/LM_Cutting_Tools/High_Speed_Steel_Circular_Saw_Blades.html L M Cutting Tools] | |
| − | + | Original blade sharpened, and new blade supplied 28/10/2016 | |
== Issues == | == Issues == | ||
| − | |||
| − | |||
When the metalworking area is completely laid out, there may be space for this saw to be permanently sited on a bench and we can fill the reservoir with cutting fluid. Until then, it cuts dry, or needs manual feeding of fluid (as appropriate for the material being cut). | When the metalworking area is completely laid out, there may be space for this saw to be permanently sited on a bench and we can fill the reservoir with cutting fluid. Until then, it cuts dry, or needs manual feeding of fluid (as appropriate for the material being cut). | ||
Latest revision as of 14:26, 22 March 2019
| Stayer | |
|---|---|
 | |
| Manufacturer | Stayer |
| Model | TF84 |
| Location | Metalworking Area |
| Team | Metalworking |
| Induction Required | No |
| Tools: all pages • list • Power Tools • Broken tools {{}} | |
Stayer cutoff saw (or 'cold cut chopsaw'). Usually on the metalwork bench, this is a slow speed circular saw for cutting metal.
Intended for cutting with a coolant supply for which there is a pump - to be commissioned and checked.
The blade is made of High Speed Steel, and these are cut and sharpened to order by L M Cutting Tools
Original blade sharpened, and new blade supplied 28/10/2016
Issues
When the metalworking area is completely laid out, there may be space for this saw to be permanently sited on a bench and we can fill the reservoir with cutting fluid. Until then, it cuts dry, or needs manual feeding of fluid (as appropriate for the material being cut).