Difference between revisions of "Superbox CNC Router"

From Nottinghack Wiki
Jump to navigation Jump to search
(Kress 1050 FME)
(26 intermediate revisions by 2 users not shown)
Line 3: Line 3:
 
|manufacturer=Marchant Dice
 
|manufacturer=Marchant Dice
 
|location=CNC Area
 
|location=CNC Area
−
|obtained=2016
+
|obtained=Acquired from Wireless Things after their close
 +
|obtaineddate=2016
 
|induction=No
 
|induction=No
 
}}
 
}}
−
=About=
+
The '''Superbox CNC Router''' (aka CNC Mill) is a versatile tool that can cut a wide variety of materials. The machine has 3 degrees of freedom meaning that unlike the [[Laser Cutter]], which can only cut 2D Shapes, the CNC Mill can carve shapes in 3 dimensions if you can provide the tool paths to drive it. It does not require an induction to use, but help is available if you need it! Contact the #CNC channel on [[Slack]] if you need help.  
−
The CNC Mill was acquired from Wireless Things in 2016 after their close. The machine is quite unique in having a dual Y axis stepper setup; however, this does require that the start-up procedure for homeing is carefully followed.
 
  
−
Working area for the mill is: 345mm x 345mm x 150mm<br/>
+
We operate a bring-your-own-bits policy for this machine due to the high likelihood of broken tools. Links to buy tools are available on the [[Suppliers#Milling|Suppliers]] page.
−
Max feed rate is 1900mm/min.<br/>
 
−
The spindle is a Kress 1050 FME with manual speed control from 10,000 to 29,000 RPM.
 
  
−
The mill PC is running LinuxCNC with the <code>Gmoccapy</code> interface.<br/>
+
{{TOC limit|3}} 
−
Gmocappy is a more friendly skin/interface to LinuxCNC than the default <code>Axis</code> some people might be more familiar.
+
==Overview==
 +
{| class="wikitable" width=50%
 +
! width=20% | Parameter
 +
! colspan="3" | Value
 +
|-
 +
| style="background-color:#efefef;" rowspan="2" | Working Area
 +
| style="background-color:#efefef;" | X
 +
| style="background-color:#efefef;" | Y
 +
| style="background-color:#efefef;" | Z
 +
|-
 +
| 345mm
 +
| 345mm
 +
| 150mm
 +
|-
 +
| style="background-color:#efefef;" | Maximum Feed Rate
 +
| colspan="3" | 1900mm/min
 +
|-
 +
| style="background-color:#efefef;" | Spindle
 +
| colspan="3" | Kress 1050 FME
 +
|-
 +
| style="background-color:#efefef;" | Control Software
 +
| colspan="3" | [http://linuxcnc.org/ LinuxCNC]
 +
|-
 +
| style="background-color:#efefef;" | Control Interface
 +
| colspan="3" | [http://www.linuxcnc.org/docs/2.7/html/gui/gmoccapy.html Gmoccapy]
 +
|-
 +
| style="background-color:#efefef;" | Control Hardware
 +
| colspan="3" | Superbox 2.8
 +
|}
  
−
More info about Gmocappy can be found here: http://www.linuxcnc.org/docs/2.7/html/gui/gmoccapy.html <br/>
+
===Software===
−
Slightly older video but might be useful: https://www.youtube.com/watch?v=O5B-s3uiI6g&t=219s<br/>
+
LinuxCNC, with the Gmoccapy interface, is the control software that we use to drive the tool. There is a dedicated computer hooked up to the machine for this purpose.  
  
−
==Y Axis==
+
LinuxCNC reads G-Code in the .ngc format. You can use any CAM (Computer Aided Manufacture) package you like to create G-Code at home or on the computers in the [[Blue Room]].
−
Due to the gantry Y axis having a dual stepper drive the mill is using a development version of LinuxCNC 2.8, which can currently can cause some issue on start up.<br/>
 
−
The Y axis is also fitted with two stops, the second of which was designed and add but the hackspace to help in keeping the Y axis homing square to the X axis
 
  
−
==Spindle==
+
Slightly older video about Gmoccapy but might be useful to familiarize yourself: https://www.youtube.com/watch?v=O5B-s3uiI6g&t=219s
 +
 
 +
===Y Axis===
 +
The machine is quite unique in having a dual Y axis stepper setup; however, this does require that the start-up procedure for homeing is carefully followed.
 +
 
 +
Due to the gantry Y axis having a dual stepper drive the mill is using a development version of LinuxCNC 2.8, which can currently can cause some issue on start up. The Y axis is also fitted with two stops, the second of which was designed and added by the hackspace to help in keeping the Y axis homing square to the X axis
 +
 
 +
===Spindle===
 
[[File:Spindle controls.jpg|300px|thumb|right|Black dial (Top Left) controls speed]]
 
[[File:Spindle controls.jpg|300px|thumb|right|Black dial (Top Left) controls speed]]
 
The Spindle is a Kress 1050 FME. Its speed is manually controlled via the black dial on the top. It is a good idea to set the spindle speed whilst the spindle is stopped to minimize the operator reaching over the moving machine.
 
The Spindle is a Kress 1050 FME. Its speed is manually controlled via the black dial on the top. It is a good idea to set the spindle speed whilst the spindle is stopped to minimize the operator reaching over the moving machine.
Line 49: Line 80:
 
There is a spindle lock button to aid with tool and collet changes<br/>
 
There is a spindle lock button to aid with tool and collet changes<br/>
  
−
===Collets===
+
====Collets====
 
We have the following collets available, currently stored underneath the monitor for the CNC Computer.  
 
We have the following collets available, currently stored underneath the monitor for the CNC Computer.  
  
Line 63: Line 94:
 
|}
 
|}
  
−
==Bed==
+
===Bed===
 
The bed is made from PT25 profile Aluminium at 375mm wide<br/>
 
The bed is made from PT25 profile Aluminium at 375mm wide<br/>
 
This gives slots every 25mm for fixing.
 
This gives slots every 25mm for fixing.
Line 72: Line 103:
 
The T-Slot nuts will accept an M6 bolt.
 
The T-Slot nuts will accept an M6 bolt.
  
−
==Suitable materials==  
+
===Suitable materials===  
  
 
* Most woods
 
* Most woods
Line 80: Line 111:
 
* Others with extreme caution
 
* Others with extreme caution
  
−
This machine is best suited to fairly soft materials due to its aluminium frame. Soft woods, such as Pine, can be cut easily with great results. Plywood is a cheap material that can be used to produce simple profiles quickly but is likely to chip if you are doing any moulding operations. Other materials may work with extreme caution; YouTube videos are a good place to start.
+
This machine is best suited to soft materials due to its aluminium frame. Soft woods, such as Pine, can be cut easily with great results. Plywood is a cheap material that can be used to produce simple profiles quickly but is likely to chip if you are doing any moulding operations. Other materials may work with extreme caution; YouTube videos are a good place to start.
  
−
If you are planning to cut hard materials materials have a couple of spare tools to hand, as you will no doubt break one. Also, do not underestimate the amount of time it will take to clean the machine after the cut. Please leave the machine as you would like to find it.
+
If you are planning to cut hard materials, have a couple of spare tools to hand as you will no doubt break one. Also, do not underestimate the amount of time it will take to clean the machine after the cut. Please leave the machine as you would like to find it.
  
−
=Generating G-Code=
+
==Generating G-Code==
 
To control the tool you will need to feed it instructions. This is done through G-Code!
 
To control the tool you will need to feed it instructions. This is done through G-Code!
 
There are more than a few options available for generating G-Code. Each has different pros & cons and each requires a different set of skills to operate.  
 
There are more than a few options available for generating G-Code. Each has different pros & cons and each requires a different set of skills to operate.  
  
−
<gallery heights=200px widths=300px>
+
 
 +
<gallery align=center mode=packed-overlay heights=200px widths=300px>
 
File:Project_CatCNC_(2).PNG|Tool paths from [[Easel]]|link=CAM Cat
 
File:Project_CatCNC_(2).PNG|Tool paths from [[Easel]]|link=CAM Cat
 
File:Fusion 360 Toolpath Example.png|Tool paths from [[Fusion 360]]|link=Han Solo in Carbonite
 
File:Fusion 360 Toolpath Example.png|Tool paths from [[Fusion 360]]|link=Han Solo in Carbonite
 
</gallery>
 
</gallery>
−
==For Beginners==  
+
===For Beginners===  
 
Inventables' [[Easel]] is a 2.5D online CAM package that has a friendly GUI and only requires two small alterations to the code to enable it to function with our machine.  
 
Inventables' [[Easel]] is a 2.5D online CAM package that has a friendly GUI and only requires two small alterations to the code to enable it to function with our machine.  
  
−
==For Enthusiasts/ Advanced Users==
+
===For Enthusiasts/ Advanced Users===
 
[[Fusion 360]] is a great free software package that has tons of CAM functionality built in.  
 
[[Fusion 360]] is a great free software package that has tons of CAM functionality built in.  
 
Once you have set up your tool paths using the CAM tools in Fusion you can export the setup using the Enhanced Machine Control post processor built in to [[Fusion 360]].
 
Once you have set up your tool paths using the CAM tools in Fusion you can export the setup using the Enhanced Machine Control post processor built in to [[Fusion 360]].
 
A good place to start if you're not sure with CNC programming via Fusion 360 is the [https://www.youtube.com/user/saunixcomp/| NYCCNC Youtube channel].
 
A good place to start if you're not sure with CNC programming via Fusion 360 is the [https://www.youtube.com/user/saunixcomp/| NYCCNC Youtube channel].
  
−
=Operation Instructions=
+
==Operation Instructions==
−
==Safety==
+
===Safety===
 
This is a dangerous tool and should be treated as such.  
 
This is a dangerous tool and should be treated as such.  
 
Your safety is your own responsibility. As a guideline, you should wear as a minimum:  
 
Your safety is your own responsibility. As a guideline, you should wear as a minimum:  
Line 112: Line 144:
 
:This machine is seriously loud, you must sit very near to it to monitor the job while it’s running and it’s not uncommon for a cutting cycle to be 30 minutes or longer. Hearing damage is a very real risk. Make sure you also warn others in the CNC room of this too.
 
:This machine is seriously loud, you must sit very near to it to monitor the job while it’s running and it’s not uncommon for a cutting cycle to be 30 minutes or longer. Hearing damage is a very real risk. Make sure you also warn others in the CNC room of this too.
  
−
==Loading your tool==
+
===Loading your tool===
  
 
When loading your tool you need to ensure that as much of the shank is contained within the collet as possible. The only exception to this rule is if the job you are running requires a deep cut; then you will need the tool to stick out further.  
 
When loading your tool you need to ensure that as much of the shank is contained within the collet as possible. The only exception to this rule is if the job you are running requires a deep cut; then you will need the tool to stick out further.  
Line 122: Line 154:
 
{{#widget:YouTube|id=LiYze5CjDFU|width=640}}
 
{{#widget:YouTube|id=LiYze5CjDFU|width=640}}
  
−
==Turn on==
+
===Turn on===
 
Turn on the monitor, PC and Control box<br/>
 
Turn on the monitor, PC and Control box<br/>
  
Line 136: Line 168:
 
{{note|If you get an error message or the computer is frozen, restart the PC and try again.}}
 
{{note|If you get an error message or the computer is frozen, restart the PC and try again.}}
  
−
==Emergency Stops==
+
===Emergency Stops===
 
Make sure the physical eStop's have been cleared by twisting them and check that the eStop light on the control box is out.
 
Make sure the physical eStop's have been cleared by twisting them and check that the eStop light on the control box is out.
  
Line 148: Line 180:
 
</gallery>
 
</gallery>
  
−
==Homing==
+
===Homing===
 
The machine starts-up in <code>joint</code> mode, in this mode it is possible to move each stepper motor (0,1,2,3) independently but doing so can damage the Y axis.
 
The machine starts-up in <code>joint</code> mode, in this mode it is possible to move each stepper motor (0,1,2,3) independently but doing so can damage the Y axis.
  
Line 157: Line 189:
 
In the bottom menu now click the Home all Icon (far left)
 
In the bottom menu now click the Home all Icon (far left)
  
−
{{note|This will cause the machine to move, please make sure all axis are free and clear to move and nothing is in the way of the spindle head}}
+
{{note|This will cause the machine to move, please make sure all axes are free and clear to move and nothing is in the way of the spindle head}}
  
 
The machine should now be ready to go.  
 
The machine should now be ready to go.  
Line 169: Line 201:
 
</gallery>
 
</gallery>
  
−
==Loading G Code==
+
===Loading G Code===
  
 
After you have homed the machine using the instructions above, Click "Enter auto mode to run programs" on the right hand side menu.
 
After you have homed the machine using the instructions above, Click "Enter auto mode to run programs" on the right hand side menu.
Line 180: Line 212:
 
</gallery>
 
</gallery>
  
−
==Setting G54 and tool offset==
+
===Setting Zero===
 +
G54 is a constant value that is used to provide the offset for the local coordinate system. I.e. It is used to tell the CNC software where you have secured your work-piece to the table (Set Zero). It needs to be set before any program is run!
  
−
G54 is a constant value used to provide the offset for the local coordinate system. I.e. It is used to tell the CNC software where you have secured your work-piece to the table. It needs to be set before any program is run!
+
[[File:Tool gmoccapy - Probing.PNG|300px|right|thumbnail|Probing menu icon]]
−
 
 
−
===Through the GUI===
 
−
{{photo}}
 
 
To set it,
 
To set it,
 
# Enter Manual Jogging mode by pressing the appropriate button on the right hand side or pressing F3 on the keyboard.
 
# Enter Manual Jogging mode by pressing the appropriate button on the right hand side or pressing F3 on the keyboard.
−
# Open the probing menu by clicking on the blue icon.  
+
# Open the probing menu by clicking on the blue icon at the bottom.  
 
# Use the control arrows to move the gantry so that the centre of the tool is sitting on the point where (X,Y,Z) is (0,0,0) on your CAD model. It is easier to probe one datum at a time. E.g. X, then Y, then Z
 
# Use the control arrows to move the gantry so that the centre of the tool is sitting on the point where (X,Y,Z) is (0,0,0) on your CAD model. It is easier to probe one datum at a time. E.g. X, then Y, then Z
−
# On the bottom bar, press "X=?", "Y=?" OR "Z=?" depending on the direction you have probed in to set the zero point.
+
# On the bottom bar, press "X=?", "Y=?" OR "Z=?" depending on the direction you have probed and set the zero point.  
−
#{{note|Remember to take into account the diameter of the tool.}}This can be done by subtracting the radius of the tool from the measured value in the "Edit Offsets" menu. Check its right before running any G-Code by jogging the part to X=0, Y=0 at a safe Z height; the centre axis of the tool should be over the datum.
 
  
−
[[File:Tool gmoccapy - Probing.PNG|300px|left|thumbnail|Probing menu]]
+
{{note|If you are "touching on", remember to take into account the diameter of the tool.}}
  
−
{{clear}}
+
Accounting for the diameter of the tool can be done by typing in half the tools diameter into the probing menu box. Check its right before running any G-Code by jogging the tool to X=0, Y=0 at a safe Z height; the centre axis of the tool should be over the datum point.
−
 
 
−
===Through MDI Mode===
 
−
To set it,
 
−
# Enter Manual Jogging mode by pressing the appropriate button on the right hand side or pressing F3 on the keyboard.
 
−
# Use the control arrows to move the gantry so that the centre of the tool is sitting on the point where (X,Y,Z) is (0,0,0) on your CAD model.
 
−
# Make a note of the Abs readings on the DRO (Green text on the top right)
 
−
# Open the MDI mode of GMOCCAPY program by pressing the appropriate button on the right hand side or pressing F5.
 
−
# Set G54 by running the following command
 
−
  '''G10 L2 P1 X??? Y??? Z???'''
 
−
  Where ??? are the coordinates you noted down in step 3.
 
  
−
You should see the preview of your g-code shift to the new location.
+
If everything has been set correctly, you should see the preview of your G-Code shift to the correct location.
  
−
==Running a job==
+
===Running a job===
  
 
Once G54 is set and the code is loaded simply press the Play button located in the "Auto Mode" menu.
 
Once G54 is set and the code is loaded simply press the Play button located in the "Auto Mode" menu.
Line 216: Line 235:
 
{{note|'''ENSURE YOU HAVE EASY ACCESS TO THE EMERGENCY STOP'''}}
 
{{note|'''ENSURE YOU HAVE EASY ACCESS TO THE EMERGENCY STOP'''}}
  
−
=Example Projects=
+
==Example Projects==
  
 
If you have a project that uses this tool please add it to this list.  
 
If you have a project that uses this tool please add it to this list.  
 
It would be great to see what other people are using the CNC Mill for!
 
It would be great to see what other people are using the CNC Mill for!
  
−
*[[Han Solo in Carbonite]]
+
<gallery mode=packed-hover heights=200px widths=200px>
−
*[[Les_Plywood#Tune-O-Matic_Bridge|Les Plywood Tune-O-Matic Bridge Hardware]]  
+
File:CNCHanSolo-Complete1.jpeg|Han Solo in Carbonite CNC|link=Han Solo in Carbonite
−
*[[CAM Cat]]
+
File:Les Plywood - Installing Hardware (4).jpg|Les Plywood Tune-O-Matic Bridge Hardware|link=Les_Plywood#Tune-O-Matic_Bridge
−
*[[WW2 Prop Gold]]
+
File:Project CatCNC (4).jpg|CNC Workshop for Beginners|link=CAM Cat
 +
File:WW2 Prop Gold (4).jpg|WW2 Prop Gold|link=WW2 Prop Gold
 +
File:CNC Tool Storage - Concept 4 CNC.jpg|CNC Tool Storage|link=CNC_Tool_Storage
 +
File:DanS makercoin 4.jpg|Flip Milled Makercoin|link=Aluminium Makercoin Trial
 +
</gallery>
 +
 
 +
==Maintenance==
 +
Occasionally the CNC Router will break down and require maintenance. If you're not sure who to ask for help, the #CNC [[Slack]] group is the right place to go.
 +
 
 +
Some maintenance notes are recorded on the wiki here: [[/Maintenance|Superbox CNC Router Maintenance]] includes information about replacing the Super Box's fuse.
 +
 
 +
==See also==
 +
* [[CNC Workshop for Beginners]] - workshop designed and run by [[User:Danspencer101|Dan Spencer]]
 +
* [[Suppliers#Milling|Suppliers - Milling]]
 +
* [[Contour ShuttleXpress]] - Pendant Jog Shuttle
 +
* [[New CNC PC Pledge]] - successful [[Pledge Drives|pledge drive]] for better computer
  
 
==Resources==
 
==Resources==
 
* [http://www.endmill.com/pages/training/types.html End Mill types and characteristics (Melin)]
 
* [http://www.endmill.com/pages/training/types.html End Mill types and characteristics (Melin)]
 +
* [https://www.damencnc.com/userdata/file/859_Kress_manual.pdf Kress 1050 FME - Spindle manual]
  
 
[[Category:Tools_and_Equipment]]
 
[[Category:Tools_and_Equipment]]
 
[[Category:Computer aided manufacture]]
 
[[Category:Computer aided manufacture]]

Revision as of 13:24, 26 August 2019

Superbox CNC Router
CNC Mill.jpg
Manufacturer Marchant Dice
Model {{{model}}}
AKA {{{aka}}}
Obtained Acquired from Wireless Things after their close (2016)
Location CNC Area
Team Tools
Induction Required No
Booking {{{booking}}}
Status Defunct
Tools:   all pages • list • Power Tools • Broken tools     {{}}

The Superbox CNC Router (aka CNC Mill) is a versatile tool that can cut a wide variety of materials. The machine has 3 degrees of freedom meaning that unlike the Laser Cutter, which can only cut 2D Shapes, the CNC Mill can carve shapes in 3 dimensions if you can provide the tool paths to drive it. It does not require an induction to use, but help is available if you need it! Contact the #CNC channel on Slack if you need help.

We operate a bring-your-own-bits policy for this machine due to the high likelihood of broken tools. Links to buy tools are available on the Suppliers page.

Overview

Parameter Value
Working Area X Y Z
345mm 345mm 150mm
Maximum Feed Rate 1900mm/min
Spindle Kress 1050 FME
Control Software LinuxCNC
Control Interface Gmoccapy
Control Hardware Superbox 2.8

Software

LinuxCNC, with the Gmoccapy interface, is the control software that we use to drive the tool. There is a dedicated computer hooked up to the machine for this purpose.

LinuxCNC reads G-Code in the .ngc format. You can use any CAM (Computer Aided Manufacture) package you like to create G-Code at home or on the computers in the Blue Room.

Slightly older video about Gmoccapy but might be useful to familiarize yourself: https://www.youtube.com/watch?v=O5B-s3uiI6g&t=219s

Y Axis

The machine is quite unique in having a dual Y axis stepper setup; however, this does require that the start-up procedure for homeing is carefully followed.

Due to the gantry Y axis having a dual stepper drive the mill is using a development version of LinuxCNC 2.8, which can currently can cause some issue on start up. The Y axis is also fitted with two stops, the second of which was designed and added by the hackspace to help in keeping the Y axis homing square to the X axis

Spindle

Black dial (Top Left) controls speed

The Spindle is a Kress 1050 FME. Its speed is manually controlled via the black dial on the top. It is a good idea to set the spindle speed whilst the spindle is stopped to minimize the operator reaching over the moving machine.

Power to the spindle is controlled via LinuxCNC during operation; It will spin up once you start running the G-Code. There is a slide switch on the side of the spindle that should be left on at all times. If it is turned off the tool will simply crash into the work piece without cutting.

Dial RPM
1 10,000
2 12.600
3 17,000
4 21,000
5 25,000
6 29,000

There is a spindle lock button to aid with tool and collet changes

Collets

We have the following collets available, currently stored underneath the monitor for the CNC Computer.

1/8" (3.17mm)
6mm
8mm
10mm

Bed

The bed is made from PT25 profile Aluminium at 375mm wide
This gives slots every 25mm for fixing.

File:20mmbedplate.pdf

We have a small selection of T-Slot nuts that will slide into these channels to provide clamping anchors. The T-Slot nuts will accept an M6 bolt.

Suitable materials

  • Most woods
  • Most plastics
  • 6082 T6 Aluminium with caution
  • Brass with caution
  • Others with extreme caution

This machine is best suited to soft materials due to its aluminium frame. Soft woods, such as Pine, can be cut easily with great results. Plywood is a cheap material that can be used to produce simple profiles quickly but is likely to chip if you are doing any moulding operations. Other materials may work with extreme caution; YouTube videos are a good place to start.

If you are planning to cut hard materials, have a couple of spare tools to hand as you will no doubt break one. Also, do not underestimate the amount of time it will take to clean the machine after the cut. Please leave the machine as you would like to find it.

Generating G-Code

To control the tool you will need to feed it instructions. This is done through G-Code! There are more than a few options available for generating G-Code. Each has different pros & cons and each requires a different set of skills to operate.


For Beginners

Inventables' Easel is a 2.5D online CAM package that has a friendly GUI and only requires two small alterations to the code to enable it to function with our machine.

For Enthusiasts/ Advanced Users

Fusion 360 is a great free software package that has tons of CAM functionality built in. Once you have set up your tool paths using the CAM tools in Fusion you can export the setup using the Enhanced Machine Control post processor built in to Fusion 360. A good place to start if you're not sure with CNC programming via Fusion 360 is the NYCCNC Youtube channel.

Operation Instructions

Safety

This is a dangerous tool and should be treated as such. Your safety is your own responsibility. As a guideline, you should wear as a minimum:

  • Safety Glasses
Flying Chips, Broken Tools & loose workpieces are all possibilities
  • Ear Defenders
This machine is seriously loud, you must sit very near to it to monitor the job while it’s running and it’s not uncommon for a cutting cycle to be 30 minutes or longer. Hearing damage is a very real risk. Make sure you also warn others in the CNC room of this too.

Loading your tool

When loading your tool you need to ensure that as much of the shank is contained within the collet as possible. The only exception to this rule is if the job you are running requires a deep cut; then you will need the tool to stick out further.

Note Note: Please ensure that the collet is clicked into the collet nut before locating it into the spindle or it WILL get stuck.

The video below shows how to load a tool:

Turn on

Turn on the monitor, PC and Control box

The PC should auto boot into linux and automatically log in to the nottinghack account, if not the password is hackspace
Once in you should see the following desktop, click on the Launch CNC icon to start LinuxCNC

  • 1. Turn on the PC & Control Box

  • 2. Click 'Launch CNC' (Penguin Icon)

  • 3. Your should now see the Gmoccapy interface to LinuxCNC

Note Note: If you get an error message or the computer is frozen, restart the PC and try again.

Emergency Stops

Make sure the physical eStop's have been cleared by twisting them and check that the eStop light on the control box is out.

Reset The linuxCNC software eStop by clicking the red hand icon in the top right corner.

Turn on the machine in the software by clicking the power button just below the software eStop.

The Interface should look like this:

  • 4. Software ready to home

Homing

The machine starts-up in joint mode, in this mode it is possible to move each stepper motor (0,1,2,3) independently but doing so can damage the Y axis.

To use the machine we need to be in world mode where we operate X,Y,Z axis, LinuxCNC automatically switches to world mode once all the joints have been homed, but it is important to only ever use the 'Home all' option as homing a single joint at a time will damage the Y axis.

To open the Home menu click the icon in the bottom left corner of the interface. (Target and three arrows)

In the bottom menu now click the Home all Icon (far left)

Note Note: This will cause the machine to move, please make sure all axes are free and clear to move and nothing is in the way of the spindle head

The machine should now be ready to go.

Important There should be no need to home the machine again however if you need to (due to axis slip or a crash) please close LinuxCNC first and start again, as homing in world mode is not supported.

  • 5. Open the Homing menu (Target and three arrows icon)

  • 6. Home all joints

  • 7. Machine ready to go

Loading G Code

After you have homed the machine using the instructions above, Click "Enter auto mode to run programs" on the right hand side menu.

On the bottom row of icons you will see a folder icon. Click this to navigate to your ".ngc" G-Code file.

  • 8. Enter Auto Mode

  • 9. Browse to G-Code file

Setting Zero

G54 is a constant value that is used to provide the offset for the local coordinate system. I.e. It is used to tell the CNC software where you have secured your work-piece to the table (Set Zero). It needs to be set before any program is run!

Probing menu icon

To set it,

  1. Enter Manual Jogging mode by pressing the appropriate button on the right hand side or pressing F3 on the keyboard.
  2. Open the probing menu by clicking on the blue icon at the bottom.
  3. Use the control arrows to move the gantry so that the centre of the tool is sitting on the point where (X,Y,Z) is (0,0,0) on your CAD model. It is easier to probe one datum at a time. E.g. X, then Y, then Z
  4. On the bottom bar, press "X=?", "Y=?" OR "Z=?" depending on the direction you have probed and set the zero point.
Note Note: If you are "touching on", remember to take into account the diameter of the tool.

Accounting for the diameter of the tool can be done by typing in half the tools diameter into the probing menu box. Check its right before running any G-Code by jogging the tool to X=0, Y=0 at a safe Z height; the centre axis of the tool should be over the datum point.

If everything has been set correctly, you should see the preview of your G-Code shift to the correct location.

Running a job

Once G54 is set and the code is loaded simply press the Play button located in the "Auto Mode" menu. Don't leave the job unattended and be ready with the Hoover as a lot of sawdust can be produced.

Note Note: ENSURE YOU HAVE EASY ACCESS TO THE EMERGENCY STOP

Example Projects

If you have a project that uses this tool please add it to this list. It would be great to see what other people are using the CNC Mill for!

  • Han Solo in Carbonite CNC

  • Les Plywood Tune-O-Matic Bridge Hardware

  • CNC Workshop for Beginners

  • WW2 Prop Gold

  • CNC Tool Storage

  • Flip Milled Makercoin

Maintenance

Occasionally the CNC Router will break down and require maintenance. If you're not sure who to ask for help, the #CNC Slack group is the right place to go.

Some maintenance notes are recorded on the wiki here: Superbox CNC Router Maintenance includes information about replacing the Super Box's fuse.

See also

Resources

Retrieved from "https://wiki.nottinghack.org.uk/index.php?title=Superbox_CNC_Router&oldid=22905"