Difference between revisions of "Wood lathe"

From Nottinghack Wiki
Jump to navigation Jump to search
(shift info about old lathe to separate page)
 
(9 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{stub}}
+
{{Tool
 +
|image=File:Tool Wood Lathe.jpg
 +
|manufacturer=Generic Chinese
 +
|model=Similar to Charnwood 813
 +
|obtained=Member Donation{{clarify|reason=Was this tool acquired after this pledge drive: [[Wood Lathe Pledge]]?}}
 +
|obtaineddate=
 +
|location=Dusty Area
 +
|team=Woodworking
 +
|induction=No
 +
|defunct=
 +
|defunctdate=
 +
}}
  
==History==
+
The current Wood Lathe is a Chinese model - the [https://www.charnwood.net/products/product/floorstanding-lathe-w813/category_pathway-2 Charnwood 813] is a close match in terms of Specification.
The [[Old Wood lathe]] and tooling was replaced by a Record model circa 2015, after a [[Wood Lathe Pledge|pledge drive]] that started in 2014.
 
  
[[Category:Woodworking]]
+
The lathe has a mechanical speed control using a belt with variable diameter pulleys. It has a high maximum speed.
 +
 
 +
==Tips==
 +
The speed control must be set to a '''Low Speed before switch on'''. Once you've completed turning your part, the speed must be returned to a low speed before switching off.
 +
 
 +
Make sure that the chuck is tightened with tools before use.
 +
 
 +
{{note|If chuck and work-piece is heavy reduce the speed slowly otherwise there is a danger of the chuck unscrewing itself due to the momentum.}}
 +
 
 +
==Instruction Manual==
 +
<gallery perrow=3>
 +
Manual For Wood Lathe 1.jpg|Part 1
 +
Manual For Wood Lathe 2.jpg|Part 2
 +
Manual For Wood Lathe 3.jpg|Part 3
 +
Manual For Wood Lathe 4.jpg|Part 4
 +
Manual For Wood Lathe 5.jpg|Part 5
 +
Manual For Wood Lathe 6.jpg|Part 6
 +
Manual For Wood Lathe 7.jpg|Part 7
 +
Manual For Wood Lathe 8.jpg|Part 8
 +
Manual For Wood Lathe 9.jpg|Part 9
 +
</gallery>
 +
 
 +
==Resources==
 +
* [http://www.startwoodworking.com/plans/how-turn-basic-bowl How to Turn a Basic Bowl (Start Woodworking)]
 +
 
 +
 
 +
[[Category:Woodwork]]
 
[[Category:Tools and Equipment]]
 
[[Category:Tools and Equipment]]

Latest revision as of 11:32, 13 March 2019

Wood lathe
Tool Wood Lathe.jpg
Manufacturer Generic Chinese
Model Similar to Charnwood 813
Obtained Member Donation[clarify]
Location Dusty Area
Team Woodworking
Induction Required No
Booking {{{booking}}}
Status Defunct
Tools:   all pageslistPower ToolsBroken tools     {{}}


The current Wood Lathe is a Chinese model - the Charnwood 813 is a close match in terms of Specification.

The lathe has a mechanical speed control using a belt with variable diameter pulleys. It has a high maximum speed.

Tips

The speed control must be set to a Low Speed before switch on. Once you've completed turning your part, the speed must be returned to a low speed before switching off.

Make sure that the chuck is tightened with tools before use.

Note Note: If chuck and work-piece is heavy reduce the speed slowly otherwise there is a danger of the chuck unscrewing itself due to the momentum.

Instruction Manual

Resources