Difference between revisions of "Wood lathe"
Jump to navigation
Jump to search
Note: If chuck and work-piece is heavy reduce the speed slowly otherwise there is a danger of the chuck unscrewing itself due to the momentum.
m |
m |
||
| (16 intermediate revisions by 7 users not shown) | |||
| Line 1: | Line 1: | ||
| − | [[ | + | {{Tool |
| + | |image=File:Tool Wood Lathe.jpg | ||
| + | |manufacturer=Generic Chinese | ||
| + | |model=Similar to Charnwood 813 | ||
| + | |obtained=Member Donation{{clarify|reason=Was this tool acquired after this pledge drive: [[Wood Lathe Pledge]]?}} | ||
| + | |obtaineddate= | ||
| + | |location=Dusty Area | ||
| + | |team=Woodworking | ||
| + | |induction=No | ||
| + | |defunct= | ||
| + | |defunctdate= | ||
| + | }} | ||
| − | + | '''Do not use this machines with materials that will generate silica dust. eg soapstone and other soft stones, sandstone, ceramics, gemstones''' | |
| + | A good reference on this subject https://ehs.princeton.edu/health-safety-the-campus-community/art-theater-safety/art-safety/sculpture | ||
| − | + | The current Wood Lathe is a Chinese model - the [https://www.charnwood.net/products/product/floorstanding-lathe-w813/category_pathway-2 Charnwood 813] is a close match in terms of Specification. | |
| − | The lathe | + | The lathe has a mechanical speed control using a belt with variable diameter pulleys. It has a high maximum speed. |
| − | + | ==Tips== | |
| + | The speed control must be set to a '''Low Speed before switch on'''. Once you've completed turning your part, the speed must be returned to a low speed before switching off. | ||
| − | + | Make sure that the chuck is tightened with tools before use. | |
| − | + | {{note|If chuck and work-piece is heavy reduce the speed slowly otherwise there is a danger of the chuck unscrewing itself due to the momentum.}} | |
| − | + | ==Instruction Manual== | |
| + | <gallery perrow=3> | ||
| + | Manual For Wood Lathe 1.jpg|Part 1 | ||
| + | Manual For Wood Lathe 2.jpg|Part 2 | ||
| + | Manual For Wood Lathe 3.jpg|Part 3 | ||
| + | Manual For Wood Lathe 4.jpg|Part 4 | ||
| + | Manual For Wood Lathe 5.jpg|Part 5 | ||
| + | Manual For Wood Lathe 6.jpg|Part 6 | ||
| + | Manual For Wood Lathe 7.jpg|Part 7 | ||
| + | Manual For Wood Lathe 8.jpg|Part 8 | ||
| + | Manual For Wood Lathe 9.jpg|Part 9 | ||
| + | </gallery> | ||
| + | ==Resources== | ||
| + | * [http://www.startwoodworking.com/plans/how-turn-basic-bowl How to Turn a Basic Bowl (Start Woodworking)] | ||
| − | |||
| − | + | [[Category:Woodwork]] | |
| − | + | [[Category:Tools and Equipment]] | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
Latest revision as of 14:01, 4 September 2022
| Wood lathe | |
|---|---|
 | |
| Manufacturer | Generic Chinese |
| Model | Similar to Charnwood 813 |
| Obtained | Member Donation[clarify] |
| Location | Dusty Area |
| Team | Woodworking |
| Induction Required | No |
| Tools: all pages • list • Power Tools • Broken tools {{}} | |
Do not use this machines with materials that will generate silica dust. eg soapstone and other soft stones, sandstone, ceramics, gemstones
A good reference on this subject https://ehs.princeton.edu/health-safety-the-campus-community/art-theater-safety/art-safety/sculpture
The current Wood Lathe is a Chinese model - the Charnwood 813 is a close match in terms of Specification.
The lathe has a mechanical speed control using a belt with variable diameter pulleys. It has a high maximum speed.
Tips
The speed control must be set to a Low Speed before switch on. Once you've completed turning your part, the speed must be returned to a low speed before switching off.
Make sure that the chuck is tightened with tools before use.
Note: If chuck and work-piece is heavy reduce the speed slowly otherwise there is a danger of the chuck unscrewing itself due to the momentum.Instruction Manual
Part 1
Part 2
Part 3
Part 4
Part 5
Part 6
Part 7
Part 8
Part 9
