Difference between revisions of "Wood lathe"
Jump to navigation
Jump to search
m |
(info + pics added) |
||
Line 1: | Line 1: | ||
{{photo}} | {{photo}} | ||
{{Tool | {{Tool | ||
− | |image= | + | |image=File:Tool Wood Lathe.jpg |
|manufacturer=Generic Chinese | |manufacturer=Generic Chinese | ||
|model=Similar to Charnwood 813 | |model=Similar to Charnwood 813 | ||
Line 13: | Line 13: | ||
}} | }} | ||
− | The current Wood Lathe is a Chinese model - the [https://www.charnwood.net/products/product/floorstanding-lathe-w813/category_pathway-2 Charnwood 813] is a close match. | + | The current Wood Lathe is a Chinese model - the [https://www.charnwood.net/products/product/floorstanding-lathe-w813/category_pathway-2 Charnwood 813] is a close match in terms of Specification. |
+ | |||
+ | The lathe has a mechanical speed control using a belt with variable diameter pulleys. It has a high maximum speed. | ||
+ | |||
+ | ==Tips== | ||
+ | The speed control must be set to a '''Low Speed before switch on'''. Once you've completed turning your part, the speed must be returned to a low speed before switching off. | ||
+ | |||
+ | Make sure that the chuck is tightened with tools before use. | ||
+ | |||
+ | {{note|If chuck and work-piece is heavy reduce the speed slowly otherwise there is a danger of the chuck unscrewing itself due to the momentum.}} | ||
+ | |||
+ | ==Instruction Manual== | ||
+ | <gallery perrow=3> | ||
+ | Manual For Wood Lathe 1.jpg|Part 1 | ||
+ | Manual For Wood Lathe 2.jpg|Part 2 | ||
+ | Manual For Wood Lathe 3.jpg|Part 3 | ||
+ | Manual For Wood Lathe 4.jpg|Part 4 | ||
+ | Manual For Wood Lathe 5.jpg|Part 5 | ||
+ | Manual For Wood Lathe 6.jpg|Part 6 | ||
+ | Manual For Wood Lathe 7.jpg|Part 7 | ||
+ | Manual For Wood Lathe 8.jpg|Part 8 | ||
+ | Manual For Wood Lathe 9.jpg|Part 9 | ||
+ | </gallery> | ||
[[Category:Woodwork]] | [[Category:Woodwork]] | ||
[[Category:Tools and Equipment]] | [[Category:Tools and Equipment]] |
Revision as of 23:47, 27 February 2019
Please improve this page by adding a photo. Click to upload an image, help with using images can be found here. The talk page may contain suggestions about suitable images. |
Wood lathe | |
---|---|
Manufacturer | Generic Chinese |
Model | Similar to Charnwood 813 |
Obtained | Member Donation[clarify] |
Location | Dusty Area |
Team | Woodworking |
Induction Required | No |
Tools: all pages • list • Power Tools • Broken tools {{}} |
The current Wood Lathe is a Chinese model - the Charnwood 813 is a close match in terms of Specification.
The lathe has a mechanical speed control using a belt with variable diameter pulleys. It has a high maximum speed.
Tips
The speed control must be set to a Low Speed before switch on. Once you've completed turning your part, the speed must be returned to a low speed before switching off.
Make sure that the chuck is tightened with tools before use.
Note: If chuck and work-piece is heavy reduce the speed slowly otherwise there is a danger of the chuck unscrewing itself due to the momentum.